[Red Infinity]

my friend use my rotor with real brittle paint took me 10 minutes to clean it.

[m4ndark]

took 1 shots inside the Rotor ( using speedfeed of corse ) took me 2mins to open it, put under the water, dry it and re assembly.<br>rotor ftw man, cant go wrong <br>

[andrewthewookie]

Even though I'd probably never use it, I still want to find some way to manufacture the .50 rotor arms I've got half done in Blender.

This post has been edited by andrewthewookie: 13 February 2012 - 08:21 PM

[epic meal time]

ok, so any opinions comparing the rotor to the z2?

[Red Infinity]

rotor wins.

[Hebiki]

epic meal time, on 13 February 2012 - 08:32 PM, said:

ok, so any opinions comparing the rotor to the z2?

disassemble a Z2, tell us how it goes.

then we'll gladly welcome you back into the Rotor Syndicate.

[kanonjon]

Hebiki, on 14 February 2012 - 01:28 PM, said:

epic meal time, on 13 February 2012 - 08:32 PM, said:

ok, so any opinions comparing the rotor to the z2?

disassemble a Z2, tell us how it goes.

then we'll gladly welcome you back into the Rotor Syndicate.

Thats a point I have been tried to point out million of times. Thanks for saying that in a simple and understandable way.

[TK-421]

kanonjon, on 14 February 2012 - 01:32 PM, said:

Hebiki, on 14 February 2012 - 01:28 PM, said:

epic meal time, on 13 February 2012 - 08:32 PM, said:

ok, so any opinions comparing the rotor to the z2?

disassemble a Z2, tell us how it goes.

then we'll gladly welcome you back into the Rotor Syndicate.

Thats a point I have been tried to point out million of times. Thanks for saying that in a simple and understandable way.

Holy shit it's kanon, you're not around here often enough. When can we expect more vids?

[Hebiki]

kanonjon, on 14 February 2012 - 01:32 PM, said:

Hebiki, on 14 February 2012 - 01:28 PM, said:

epic meal time, on 13 February 2012 - 08:32 PM, said:

ok, so any opinions comparing the rotor to the z2?

disassemble a Z2, tell us how it goes.

then we'll gladly welcome you back into the Rotor Syndicate.

Thats a point I have been tried to point out million of times. Thanks for saying that in a simple and understandable way.

TK-421, on 14 February 2012 - 01:48 PM, said:

kanonjon, on 14 February 2012 - 01:32 PM, said:

Hebiki, on 14 February 2012 - 01:28 PM, said:

epic meal time, on 13 February 2012 - 08:32 PM, said:

ok, so any opinions comparing the rotor to the z2?

disassemble a Z2, tell us how it goes.

then we'll gladly welcome you back into the Rotor Syndicate.

Thats a point I have been tried to point out million of times. Thanks for saying that in a simple and understandable way.

Holy shit it's kanon, you're not around here often enough. When can we expect more vids?

^^^ yes... more vids of the sexy DC2 in action please.

[epic meal time]

just sold my rotor): buying a z2 in a few hours, even though i'll be out of the club will i still be able to post in here?

oh, and hebiki, i am going to start a dye/proto gun owners club again, probably next week, when i get my dm9(:

[kanonjon]

TK-421, on 14 February 2012 - 01:48 PM, said:

kanonjon, on 14 February 2012 - 01:32 PM, said:

Hebiki, on 14 February 2012 - 01:28 PM, said:

epic meal time, on 13 February 2012 - 08:32 PM, said:

ok, so any opinions comparing the rotor to the z2?

disassemble a Z2, tell us how it goes.

then we'll gladly welcome you back into the Rotor Syndicate.

Thats a point I have been tried to point out million of times. Thanks for saying that in a simple and understandable way.

Holy shit it's kanon, you're not around here often enough. When can we expect more vids?

Hehe, well, Im hang out alot in the cockers club

[Hebiki]

epic meal time, on 14 February 2012 - 02:58 PM, said:

just sold my rotor): buying a z2 in a few hours, even though i'll be out of the club will i still be able to post in here?

oh, and hebiki, i am going to start a dye/proto gun owners club again, probably next week, when i get my dm9(:

everyone is welcome to post. so yes you can continue to hang out in here.

dye/proto club.. i was supposed to start a Version 2... but im lazy.

[epic meal time]

Hebiki, on 14 February 2012 - 04:07 PM, said:

epic meal time, on 14 February 2012 - 02:58 PM, said:

just sold my rotor): buying a z2 in a few hours, even though i'll be out of the club will i still be able to post in here?

oh, and hebiki, i am going to start a dye/proto gun owners club again, probably next week, when i get my dm9(:

everyone is welcome to post. so yes you can continue to hang out in here.

dye/proto club.. i was supposed to start a Version 2... but im lazy.

haha! its ok, ill get one going as long as you make a sig picture for it! if it were sick then that would be amazing haha

This post has been edited by epic meal time: 14 February 2012 - 04:18 PM

[andrewthewookie]

So I'm glad I got the Exalt for my Rotor when I did, because I had accidentally chipped off most of the lip off the underside of the lid without realizing it, and any amount of shaking would cause it to open with paint inside.

And yes, this pointless update is just to bump the thread.

This post has been edited by andrewthewookie: 17 February 2012 - 10:40 PM

[Hebiki]

andrewthewookie, on 17 February 2012 - 10:38 PM, said:

So I'm glad I got the Exalt for my Rotor when I did, because I had accidentally chipped off most of the lip off the underside of the lid without realizing it, and any amount of shaking would cause it to open with paint inside.

And yes, this pointless update is just to bump the thread.

you playing DON this year? if so... what side?

[etekgirl27]

i have a purple speedfeed on my rotor...andrew is so jelly

[andrewthewookie]

Hebiki, on 19 February 2012 - 03:18 AM, said:

you playing DON this year? if so... what side?

Probably, and I'll be on Ekron. Gotta side with Tazz again.

etekgirl27, on 19 February 2012 - 03:26 AM, said:

i have a purple speedfeed on my rotor...andrew is so jelly

[Hebiki]

andrewthewookie, on 19 February 2012 - 12:33 PM, said:

Hebiki, on 19 February 2012 - 03:18 AM, said:

you playing DON this year? if so... what side?

Probably, and I'll be on Ekron. Gotta side with Tazz again.

etekgirl27, on 19 February 2012 - 03:26 AM, said:

i have a purple speedfeed on my rotor...andrew is so jelly

cool.. since i work for Tazz... gotta play for him too. LOL

now if we can only convince Etekgirl to come out with some more Pinokio Army Members.

[Red Infinity]

i have a green speedfeed on a red rotor

[m4ndark]

i also use exalt speedfeedm, got black w/ black rotor