[Dev.]

Alright then I'll keep the lower tube stock. Thanks for the info guys.

OEFVeteran, on 07 February 2013 - 11:11 AM, said:

i am going to be doing tech on cockers for the site i write for, paintballtech.net... if there is anything you guys want to see or have questions on, let me know, and i will see wabout putting them in my articles and walk throughs

I'd like to know how to set up and balance the valve and hammer springs. That's the only thing that I don't really know how to do with cockers.

[OEFVeteran]

that is on my list of articles

[LV Backpacker]

OEFVeteran, on 07 February 2013 - 11:11 AM, said:

i am going to be doing tech on cockers for the site i write for, paintballtech.net... if there is anything you guys want to see or have questions on, let me know, and i will see wabout putting them in my articles and walk throughs

Can I say everything?

[Dev.]

Took me quite a while to get it cleaned. I got it up and running today, although I do have to fix a minor blowback issue. Just gotta get my tanks refilled. Here are some pictures!

[cocker addict]

Descent, I love that frame

[Kevin]

Oh boy, just sealed the deal for a nice and rare cocker I've been wanting for years!

[LV Backpacker]

Kevin, on 08 February 2013 - 01:45 PM, said:

Oh boy, just sealed the deal for a nice and rare cocker I've been wanting for years!

One of the things I thought when I read this was: "Did Brass Eagle ever make a cocker?"

[riddler]

Kevin, on 08 February 2013 - 01:45 PM, said:

Oh boy, just sealed the deal for a nice and rare cocker I've been wanting for years!

what'cha get?

[ABOMBER760]

OEFVeteran, on 07 February 2013 - 11:11 AM, said:

i am going to be doing tech on cockers for the site i write for, paintballtech.net... if there is anything you guys want to see or have questions on, let me know, and i will see wabout putting them in my articles and walk throughs

suction timing, timing for efficiency and timing for quietness, etc.

[OEFVeteran]

suction timing is something i am not even going to touch on as i see it as a "cocker myth".... i've shot "suction timed" cockers and they didnt shoot any faster or feed any better... so, if you are patiently waiting for anything related to suction timing from me, you are going to be waiting for a very very long time

[Kevin]

my new e2 karni shoots fine as long as I keep it under 10bps, but sputters and misfired when I walk it. Its not the lpr Im pretty sure. Im stuck for the moment.

[OEFVeteran]

hammer lug... and make sure your board is set to factory fast

[cocker addict]

^^ make sure your hammer lug is releasing toward the top on the solenoid travel. Use good fresh batteries, this is key with any eblade.

[OEFVeteran]

if my E2 boards battery indicator drops below half i replace the batteries.. otherwise weird shit happens... and the streams might get crossed...

[Kevin]

well it has a fresh battery, so thats not it. Could it have anything to do with the ram has no qev's on it?

[cocker addict]

most rams can achieve +15 cps. I can hit 18 on my eblade with on qevs. Does the ram move freely back and forth with no binding?
Check basic timing and then you may have to talk to the oracles on the customcockers forum.

This post has been edited by cocker addict: 08 February 2013 - 05:37 PM

[OEFVeteran]

pic of the ram?

[Kevin]

Kinda bullet shaped. I really dont know what kind of ram it is.

[cocker addict]

that looks like a ccm ram and a tickler lpr.

[WihGlah]

Me at Jason Wheeler's pro-clinic.

This post has been edited by WihGlah: 10 February 2013 - 01:11 PM