[mrcuddles]

Marker: 2009 Proto matrix Rail
Condition: 8/10. Has some barrel tip wear and the asa is kinda chewed up by the fitting from where I tried to get it off.
Color: Air Force (Blue and Silver)
Upgrades: None
Known Problems: ASA is crap. I tried to fix the fitting on the asa and it completely stripped. Im working on getting a new ASA.
Asking Price: $300 OBO shipped
Shipping Options: USPS Priority
Trades of interest: Ego's, Etek's, Marq's, Proteges. Basically poppits but I'll look into anything.
Location of item: 45840
What is Included: Gun, barrel and fittings.

Note: There is NO asa

This post has been edited by mrcuddles: 10 August 2011 - 07:47 PM

[mrcuddles]

Bump. I will look at any offer.

[mrcuddles]

Bump

[nickn43]

Would u trade for dp f8?

[mrcuddles]

nickn43, on 10 August 2011 - 06:06 PM, said:

Would u trade for dp f8?

No thanks. Not really into DP. Thanks anyway though.

[Collie Dog]

I like the look of this marker.

If I had more than $200 to offer I'd like to offer but i feel that would be a lowball. Although you say it is missing an ASA and assuming this , that means no fittings or macro line?

You say the ASA is stripped, do you mean the fitting hole or the tank reg screw in port?

This post has been edited by Collie Dog: 11 August 2011 - 03:09 AM

[mrcuddles]

Collie Dog, on 11 August 2011 - 03:05 AM, said:

I like the look of this marker.

If I had more than $200 to offer I'd like to offer but i feel that would be a lowball. Although you say it is missing an ASA and assuming this , that means no fittings or macro line?

You say the ASA is stripped, do you mean the fitting hole or the tank reg screw in port?

Just the fitting is stripped. No holes. You know the part where you stuck a wrench on to get the fitting off? Well that is stripped.

[mrcuddles]

Bump

[Collie Dog]

Well that can be fixed with tef-tape I think?

[TheGuy]

free up

[doritos and salsa]

wait so you cannot unscrew the fitting? use vice grips and squeeze then twist problem sloved

[mrcuddles]

doritos and salsa, on 12 August 2011 - 09:59 PM, said:

wait so you cannot unscrew the fitting? use vice grips and squeeze then twist problem sloved

Already tried it.

[Spartan Zero]

mrcuddles, on 13 August 2011 - 12:57 PM, said:

doritos and salsa, on 12 August 2011 - 09:59 PM, said:

wait so you cannot unscrew the fitting? use vice grips and squeeze then twist problem sloved

Already tried it.

Put it in a vice, get a mini torch or even a BBQ lighter will do, lightly and moderately heat the Macro fitting up at the threads, and then try taking it off, be careful it's HOT, if it doesn't work, continue, chances are the tefflon is making it stick or someone applied Red or Blue Loctite to it...

If you tried, tried and tried and still doesn't work, that means someone crossthreaded it, meaning the ASA and Macro fitting is garbage and or you'll have to take it to a tech...but I don't think he'll do anything different than what was mentioned above...

This post has been edited by Spartan Zero: 13 August 2011 - 01:09 PM