[karolinen]

Found this http://www.scarabarm...bsite/index.php dont know if this is a new have not seen eny thred about em looks promising
this is a pic of it






it looks nice have heard that its Fs ready found there facebook here...https://www.facebook.com/scarabarms. ithink it look fantastic.

Fond more pic of there Fs rounds ifound it on the swedish forum.



and some info about the rounds
Hey guys, hope you all having a good day!

1. Top right is a first strike the protruding nipple does cause some problems however we went around that with certain features in the TGR2 components.

2. This is the Scarab Round Gen 1 design and I don't wanna disappoint u but we will not be releasing this as we mentioned in our earlier post, however we will be releasing the Scarab Round Gen2 in 2013. Although we believe that the gen1 has better trajectory properties compared to the FS we are looking for much more hence the Gen2.

3. The serrations do make the round fragment at lower velocities.

4. The rifling is different

5. Pricing will be announced as soon as gen2 is ready but I assure you we will price it so that it's affordable as much as our cost allows us too we want as many players to get into Milsim and the last thing we wanna do is make it financially impossible for players to purchase regularly.

I hope I didn't miss anything


and a youtube adress: http://www.youtube.com/scarabarms

This post has been edited by karolinen: 07 February 2013 - 11:46 AM

[eightcoheed]

Looks pretty bad ass. Like how they are changing the FS rounds up a bit.

[Irish725]

Only issue with these is they don't have a velocity adjuster...you have to swap out the springs to get different velocities.

[68OneShot]

That's sounds like a pain. Old guns were adjusted that way right.

This post has been edited by 68OneShot: 07 February 2013 - 01:42 PM

[Irish725]

Supposedly its a super simple swap, and from what I've heard from other mag-fed'ers its nice to set it and not have to putz with it, but I am still not convinced.

Also supposedly they are releasing an external velocity adjuster sometime in the future...or something. That could be BS for all I know.

[madsnipes]

[eightcoheed]

Would be cool if they put the velocity adjuster where the gas block is.

[ihavemonsterballs]

If you are going to be playing woodsball it may be hard to hit your targets in 2-3 shots, you may run out of ammo quick. I think this is great that they made it come with the extra mags but it would be nice to have a feed neck on the side so you could fit an elbow to it for a hopper. The feed neck wouldnt get in the way of the rail too. Overall, it still looks great though (:

[TooTallNiCo]

Hopper adapters on magfed guns is blasphemy!!!

[BurningPlaydoh]

ihavemonsterballs, on 08 February 2013 - 01:21 AM, said:

If you are going to be playing woodsball it may be hard to hit your targets in 2-3 shots, you may run out of ammo quick. I think this is great that they made it come with the extra mags but it would be nice to have a feed neck on the side so you could fit an elbow to it for a hopper. The feed neck wouldnt get in the way of the rail too. Overall, it still looks great though (:

The whole point of buying a mag fed marker is to use it mag fed. If you want a hopper just buy any electro out there.

[Panda's Revenge]

ihavemonsterballs, on 08 February 2013 - 01:21 AM, said:

If you are going to be playing woodsball it may be hard to hit your targets in 2-3 shots, you may run out of ammo quick. I think this is great that they made it come with the extra mags but it would be nice to have a feed neck on the side so you could fit an elbow to it for a hopper. The feed neck wouldnt get in the way of the rail too. Overall, it still looks great though (:

The point of mag fed is to play with Magazines.
If you wanted an offset feedneck on a heavy gun just use a tippmann.

First strike ready is interesting.

[Irish725]

As one can see, we mag-fed'ers are a rather stingy bunch when it comes to the use of such things as "loaders" lol

[canscom]

Why would you move the mag release

[sagestylerpb]

That's a tough market with the DAM around.

Best of luck to you! Definitely looks cool.

[Irish725]

DAM doesn't really count as a "mag fed" marker in most traditionalists opinion. That is not saying it doesn't have a Mag-Fed function, and its definitely a very cool marker, but traditionally a Mag Fed marker can't swap from mags to hopper without some extensive swapping of a feedneck and such.

What do you mean they moved the mag-release? it's right there like every other AR clone out there!

[canscom]

Its up higher then on a AR it should be right in front of the trigger guard normally you can hit it with your trigger finger
Nope I'm wrong never mind

This post has been edited by canscom: 13 February 2013 - 10:27 AM

[nwerth1988]

Irish725, on 07 February 2013 - 12:43 PM, said:

Only issue with these is they don't have a velocity adjuster...you have to swap out the springs to get different velocities.

Goin' back to the early 90's it would seem lol.

[drexler]

My body is ready. Now tell my mind how much it will cost.


edit: 600... Yup. Done.

This post has been edited by drexler: 20 February 2013 - 07:10 PM

[andrewthewookie]

I'm just excited for their finned rounds to come to market, then we can have some competition against FS rounds.

[Cookybiscuit]

Don't understand these new FS's.

They're plastic?