TechPB Forum: Shego Vs. Spimmy Vs. Egomag - TechPB Forum

Jump to content

Help

2 Pages
←
1
2

You cannot start a new topic
You cannot reply to this topic

Shego Vs. Spimmy Vs. Egomag The Ultimate Showoff

#21 Panda's Revenge

Officially Sponsered by China Ball

Group: Members
Posts: 2,938
Joined: 14-November 12
Gender:Female
Location:San Diego

Posted 06 March 2013 - 09:33 PM

Wouldn't the crossover be the egomag?
Or would the crossover be an xmag?

Give me gunz for my gunz.
http://www.techpb.co...howtopic=217982

#22 bigx

Walk on Warior

Group: Members
Posts: 2,629
Joined: 04-October 11
Gender:Male
Location:Massachusetts

Posted 06 March 2013 - 10:50 PM

The crossover is muffcabage anyways

Come for my guns and I will gladly give you my bullets.

http://www.techpb.co...1 :Feedback

#23 Panda's Revenge

Officially Sponsered by China Ball

Group: Members
Posts: 2,938
Joined: 14-November 12
Gender:Female
Location:San Diego

Posted 06 March 2013 - 10:56 PM

Interestingly true.
I wouldn't touch that with a ten foot pole unless they gave it to me for free.
Then I would flip it for an axe.

Give me gunz for my gunz.
http://www.techpb.co...howtopic=217982

#24 Panda Man

Master Member

Group: Members
Posts: 4,315
Joined: 23-March 09
Gender:Male

Posted 06 March 2013 - 11:23 PM

The Crossover is not a bad gun... It's really a fun gun to shoot.

#25 Panda's Revenge

Officially Sponsered by China Ball

Group: Members
Posts: 2,938
Joined: 14-November 12
Gender:Female
Location:San Diego

Posted 06 March 2013 - 11:25 PM

While an interesting concept, that's not the point of this thread.
NXT Shocker is a problem I'm having, SFT Shockers can be found easily.

Give me gunz for my gunz.
http://www.techpb.co...howtopic=217982

#26 SOUP

Elite Member

Group: Members
Posts: 7,380
Joined: 11-October 08
Gender:Male
Location:Indiana

Posted 07 March 2013 - 12:00 AM

There is more to making a shego then just putting an ego frame on a shocker. You'd have to tap the frame to relocate the screw placement and actually do some internal solenoid/ wire work in order to make it function. It's not a plug and play type of build for the most part, but it should be simple enough.

As far as tracking down a shocker, I don't see why an sft wouldn't work. The thing with the sft is that it uses the reflective eyes and the eyes used with an ego board are break beam... so if you went the sft route you'd either have to have the body milled for bb eyes, or run it blind. Either that or figure out how to run the reflective eyes on it, which I've never seen done and I doubt it's even possible.

An nxt should run you about $200 on the norm, if it's all stock. Pbnation is your best bet. I've done over 50 deals on there and have never been scammed. Just be smart about it and you got nothing to worry about :tup: