[rebel492991]

all right, i got a wrath in a trade and i decided to pump it.

so i got a virtued wrath to make my pump with.Now i didn't want to make a "fake pump" where all the pump arm does is cycle the bolt, so i came up with a way to make a true pump.

-so first i took the spring out of the ram sleeve, because the wrath is a fasor

-i cut the ram and basically slotted it, but i didn't relay slot it but it works as
a slotted ram would, allowing the bolt pin the push the ram back but slide the bolt forward interdependently. and this is how that looks.


-then i attached a pump arm and rod to the bolt, using a clever method i say on one of the spump threads. and well that's it ll.


so when i push back the pump arm the bolt pin moves back and sits the ram in the ready to fire position, then when i pull the trigger it pushes the ram into the popit and shoot the ball, repeat. the only problem i will have at the moment is that i have to push the pump arm forward after i pump it backward, but i am going to come up with a way for a spring to push the pump arm forward again.

[Youngin]

thats soooo sick. you need to get a vid up. lol a virtued pump!

[itz jake]

nice crocs haha

[Stuffy]

You should also find a local machinist to mill you out a pump handle and rod(s) out of aluminium.

[kfinchie]

hahaha soo sick.. that pump arm does look ghetto, still sick

[y2ksurvivor]

itz jake, on Oct 8 2008, 06:48 PM, said:

nice crocs haha

ROFL that was the first thing i noticed too.

[pbgunner93]

lol nice wrath pump, here is the one i did in five minutes

[project_guy_789]

sick...no idea on the push forward

[rebel492991]

pbgunner93, on Oct 14 2008, 07:39 PM, said:

lol nice wrath pump, here is the one i did in five minutes

is that a true pump or just a pump where you cycle the bolt to chamber a ball.





and im looking for a bolt that has the same threads as the lpr and i will make the pump arm atach to that, just lowes or home depot dosnt have anything, im going to try napa.

[Youngin]

MAKE A VID!!!!!!!

[frontplaya_75]

Replace the seethrough grip and take one of those pump grips from those $20 marker from wallmart and slide it over the stirofoam

[SOUP]

I like the hitman mod , How long did it take you to do this little project?

[oerllikon]

wow, thats wicked. really clever+original
its cloriginal
It would be pretty cool to see this thing in action

Those crocs are pimp

[Brick]

Returning the pump arm forward = Thick strong elastic, one end around the bolt pin, the other around the feedneck

[rebel492991]

like 30 min, but i thought it out before i went and did it... but im still thinking of a different way to mount the pump arm the only reason that on there is to make sure the ram works.

[the man]

sick... im getting my wrath custom milled to fit a D2 frame, and alias front block. Its gonna be amazing

[Ames]

is it closed bolt

[fattymcspanks]

its a wrump!

[GhostFlanker]

That's definetly one of the faster pumps out there.

[The Desacrator]

Very nice

You can put a spirng over the barrel back. from where the threeads screw in the the foam of your pump handle.aslo try Phantom pump handles and see if they fit your barel. You can try and make the bre of the Phantom bigger if you need to/want to.