[firebirdjimbo]

if you have a broken gun and need it fixed and are too lazy, dont trust yourself, or dont have the time, i can do it for you. i have every tool you need to disassemble and reassemble everything in every marker out there. i consider myself a great gun tech and always do a good job, ive teched all sorts of guns, spyders to ions to marq to angels to vice's pretty much everything out there. heres how it works
i also polish internals on tippmanns to make then shoot smoother, and i micro polish bolts for any gun. i do soldering work on anything for a gun


you pay shipping to and from my house and pp me $30 ($15 of that covers shipping back to you) and this is what i'll do.
complete teardown of all the regs, housings for everything, clean absolutely everything and relube it for you, once i'm done i will put some air through the gun and make sure i fixed whatever problem you were having.

i will leave the regs the same pressure as when i got your gun and i wont mess with any settings on the board. unless you give me an extra $5 to do that for you, and i will put a pod of paint through your gun to make sure it shoots well and i will set your velocity at 280fps or whatever you want me to set it at.

i ship usps flat rate boxes and i insure them and add confirmation, depending on how much your gun is worth insurance might be more or less, $200 and under is $2.75 and $200 and over is $4.75. shipping takes 2-3 days usually, its very fast.

so say you have an (enter any gun here) and its having horrible shootdown and chopping and its all dirty and not consistent, i'll give you my address, you ship your gun to me and pay pal me $30 once i get your gun (2-5 days depending on how you shipped) i will do a complete teardown when i get it and completely clean everything for you, put it back together and air it up and make sure it shoots(dry fires). but if you paypal me $35(extra$5) i will also set your regs to where they need to be at and chrono your gun and make sure your board settings are what they should be. then i will package your gun up, and ship it back to you and then pm you with the tracking info. and its a done deal.

orings and lube are all part of the deal, i dont charge extra no matter how many you need, if i see an oring that needs replacing i will replace it and lube is not an issue you dont have to pay extra for that either.

if your gun needs a part, say a broken noid or board or something, you will either pp me the money needed for the part or you can just order it and have it shipped to my house, if i break anything at all in your gun while fixing it, that money comes completely out of my pocket and i will replace the part.

This post has been edited by firebirdjimbo: 12 June 2012 - 12:37 PM

[M01R]

You consider yourself a great gun tech? Do you have any teching certificates from any major companies or an airsmithing certificate?

[firebirdjimbo]

no i dont yet. but i have a few guys on here who can vouch for me. i'm almost 20(4 days), very mature, and i take my time. i also have a great understanding of how markers work.

This post has been edited by firebirdjimbo: 26 June 2010 - 01:02 AM

[WasabiBoi]

Hey I need my ICD 04 BKO teched. Maybe a bad noid.

[firebirdjimbo]

WasabiBoi, on 26 June 2010 - 08:19 PM, said:

Hey I need my ICD 04 BKO teched. Maybe a bad noid.

alright, i'll pm you.

[firebirdjimbo]

bump, one gun down. i tuned his gun and it shoots great, and he left me great feedback.

This post has been edited by firebirdjimbo: 10 August 2010 - 10:55 PM

[WasabiBoi]

This guy is legit!

[nowan4ever]

how much would polishing a tippmann A-5's improve it?

[firebirdjimbo]

nowan4ever, on 26 March 2011 - 05:49 PM, said:

how much would polishing a tippmann A-5's improve it?

it does make it a smoother shot, less air consumed and its easier on the internals.

[firebirdjimbo]

test

[-ORaNGe-]

This is posted in the wrong place, we do not allow BST outside of the BST, this could go up in the services section however but you need to have proper formats etc. and no dealing via PM. Also you MUST guarantee your work 100%, if you make an error you must refund the cost of the work and refund them the money necessary to replace any damaged guns or parts.