TechPB Forum: SMBulls9 - Viewing Profile - TechPB Forum

I'm looking to buy EBlade BB Eyes for a WGP Sutococker SR. Does anybody have any or have a link of where to purchase?

Before I start, I apologize for the length. I'm just trying to be thorough. I recently acquired a WGP Autococker SR from a friend and have been trying to fix it and get it up and running, The main problem was it was chopping paint like crazy because the eyes didn't work so you had to use it with the eyes turned off. I cleaned it several times but it still didn't work. You could tell because when there is nothing in the path of the eyes, the LED on the board is supposed to blink. Also it was shooting like every three seconds. I inspected the photo eyes and saw that one of them was burnt out. I used a voltmeter to make sure the board was giving off the correct output and it read 3.2V which I would imagine anywhere between 1V and 3.5V is fine. So I just ordered new eyes. I got Kingman Spyder eyes because I saw that WGP parts are very similar to Kingman according one of Mike's video and on account WGP is out of business. However, when they arrived, they weren't flat eyes, they were the kind as if it looked like an LED was at the end so they stuck out into the chamber of the marker. By the way, when I turned it on it worked because the LED started blinking. When I tried to move the eyes back the receiving break beam eye wouldn't pick it up so it stopped blinking (which I find kind of weird since all paintball guns have roughly the same bore give or take a tenth unless these eyes were meant for a marker where the eyes are lower in the chamber). Anyways, I'm trying to find eyes for this gun. Does anyone know where I can get something that will work. Thanks a lot in advance!