- Active Posts:
- 533 (0.64 per day)
- Most Active In:
- Equipment Advice (156 posts)
- 02-February 11
- Profile Views:
- Last Active:
- Dec 06 2012 10:18 PM
- Member Title:
- Sophomore Member
- 29 years old
- August 24, 1983
Posts I've Made
31 October 2012 - 11:12 AMgun is sold to kevinsio
29 October 2012 - 11:48 AMright on, once i have received payment i will ship the gun asap
28 October 2012 - 09:41 PMpending to kevinsio for 620 shipped
28 October 2012 - 09:44 AM
26 October 2012 - 09:59 AMHe may need to check the eye wire harness to make sure he didn't pinch or damaged it... Also make sure his board is clean from paint too.
I had a geo2 board that was fried because the previous owner never cleaned the paint that got on it
he dropped me off the gun and i took it all apart checked everything and it all looks good to me. the eyes work fine so i went as far as taking the reg apart as well as the ball check in the solenoid. this is what happens, i air the gun up then turn it on, i then can fire one shot then everyone after spudders and the bolt seems to not be moving all the way forward??? is that bolt stick or something?? any ideas??? and if i shot the gun off and leave it aired up then turn it back on the first shot fires then the rest spudder everytime......
you have bolt stick and on top of that you lost the golf tee in the asa part of the SL3.
ensure that you have the bolt assembly put in correctly along with the solenoid check valve. Lube issues usually dont happen wtih the geo2 at least in my expereince.
how did you come to the assumption that i don't have the golf tee part in my reg elbow? i will check it for sure when i get home and i know its not bolt stick as i took the bolt and can from my own geo 2.1 that works flawlessly and put it in his geo 2 to see if it would work and it did the same shit. so i have ruled out bolt stick, it must be something with the solenoid i am thinking of swapping the one in my 2.1 to his 2 just to see if it works? maybe he needs a new noid?