TechPB Forum: cpuwhiz22 - Viewing Profile - TechPB Forum

This one was good...

http://detroit.craig...3521013462.html

$1000 for a CO2 tank

I just play for fun. I play at my local field every weekend with the other walk on players, and a few times a year I play on private property with a bunch of friends. Tournaments personally are something that I have never considered. I may when I get to the point where it is no longer fun to shoot at other people who are also there for fun, but for now I just like to go and shoot a case every weekend for a few hours.

I'm confused, what are the burst disks rated to? From my experience you see 1.5K disks on CO2 tanks, and 5K on HPA since they are filled to 3000+ PSI. Are you using 1.5K disks on a 4500 PSI tank?

I listen to the sounds around me...I can't imagine playing without being able to hear whats going on.

Thanks for the tips.

My main motivation to swap the bolt was to maximize efficiency. I use a scuba tank to fill so can only fill to 3000 PSI (and less after the first fill), so it's important to get the most shots I can per fill. I don't mind refilling after each game, but I don't want to end up running out of air mid-game. I was planning to do the sweet spotting and swap the bolt since it seems like doing that would allow me to drop the operating pressure to around 140-160, and additionally I should be able to lower the dwell. My biggest concern was that if there is any problem I might create doing this out of the box.

I am thinking the worst case is that once it breaks in a little, I will need to re-tune it, which is fine. I just want to make sure there won't be any long term risk from making such changes before it has even seen paint.

Thanks!