TechPB Forum: fatalreaction - Viewing Profile - TechPB Forum

NXT Shocker
Marq Rapper
Alien Invasion
E2 Cockers
iFramed Impulses

it would depend almost entirely on the gun... which pump are you using? if its something like a phantom with no real detent then i probably wouldn't run a rotor, or force fed at all... if its something like a sniper type then you should be fine with the rotor

they are made buy hudredth monkey, but the site has said they're sold out, and has read that way for the last couple years...


Whoops i stand corrected... back in stock


http://hundredthmonk...m/Headgear.html

another option may be the DIY then have it hydro-dipped

it really depends on the timmy... is it a stock GZ or is it a 2k5'd GZ? a stock GZ should have the same efficiency numbers as any other 2k2, the only difference is the GZ frame is LED only with a dipswitch board, i haven't seen any reliable efficiency numbers from a 2k2 that i can recall but should be somewhere around 1300 off of a 68/4.5k


as far as shot quality, it isn't G6r smooth but it should be very close (least it is compared to mine). i'm running my dragon at 8ms of dwell, LPR @ 75psi and my HPR at 275, it is completely stock and it shoots like butter... however depending on the settings on your quest it will probably shoot smoother