TechPB Forum: The Paint Dude - Viewing Profile - TechPB Forum

Just a simple question was curious about is the Rev-i still being made by DP or is it just left overs?

Ok so my GOG eXTCy last weekend decided to start what I believe may be bolt stick i'm unsure; (me=bad tech) when you try firing it you hear some slight air go through the gun and then it will continue that until after maybe 10-20 trigger pulls it fires it does this with eyes on and off. I replaced the battery, took out the bolt wiped off the lube and re lubed it with Gr33s3e and cleaned the eyes. Still did nothing so the tech at my field adjusted the FSDO option on the board to 15ms and disassembled the reg and re lubed it. It still does the same thing anyone have ANY suggestions?

Ok so I purchased a Bob Long Alias from eBay and all in all the marker is in amazing condition far exceeding my expectations but I noticed the trigger was a little strange feeling and when I got around to taking it apart and inspecting this I realized the adjustment screw and spring was missing in the upper most screw hole of the trigger. So could I even get a replacement trigger screw and spring for a marker this old? And where if so.

I've been looking for some footage of a Replay XD not the 1080p or R7 just the Replay XD and cant find any. Does anyone have one of these cameras? How is the quality of the video?

Ok so I have gotten a hold of a gen 3 intimidator and when trying to fire it noting happens just a click from what I assume would be the solenoid and micro-switch. When you air the marker up the bolt instantly goes back past the milling about a 1/4in and you can push forward on the bolt slightly and let go then it will fire but not with enough air to propel a ball. And you get a * on the board meaning there is an error with the eyes.
Things i've tried:
2 new different batteries
full tank of hpa
adjusting hpr and lpr
cleaning the eyes