hello Techpb, hello ninja paintball!! Greetings from Greece!
I am a new user, this is my first post.
I Received my new Ninja smp reg yesterday and i have installed it to my new Safer 1.5L tank (the tank that Thunderlight talks about!).
But i have a question.
Is it normal to have a minor gap of about 0.5-0.7 mm.
The reg was installed hand tighten, then i used more force by hand but the gap remained the same(i am really muscular but i didn't give all my power
Then i removed it and tried different o-rings (if i am not mistaken the oring that was on the reg ia an -907 boss), so i tried -112 bn70 the gap remained and then -111 bn70
but again the gap was the same. when i used an -110 bn70 the reg sat completely on the tank neck and the last turn you could feel the resistance due to the oring (but not as much resistance as with
the installed one or the -112 , -111).
Is it ok to use the -110 bn70 or will i have a safety issue??
Please i am waiting for you answer as soon as possible because i am playing this weekend.
This is a photo i took.