Jump to content


Photo

Ninja Paintball Questions


  • Please log in to reply
1290 replies to this topic

#101 In_Dzone

In_Dzone

    Member

  • Members
  • PipPip
  • 244 posts
  • Gender:Male
  • Location:Southern California

Posted 10 March 2009 - 11:39 PM

I was conidering the 50 stubby tank but from what I`ve been reading in this thread it looks like their are some problems and a lot of maintenace.( :excl: note I am only 12! :excl: )Have you fixed the problems,cosmetic blimps,things popping off the reg,etc.?Also if I do get it what tank cover fits the 50 stubby?Thanks! :lol:

#102 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 11 March 2009 - 08:21 AM

If i bought my tank at my local proshop during the free sandanna promotion is there any way i could still get the sandanna? I have the reciept and everythin, if not its okay but it would be sweet if i could get the free sandanna


Sorry but i can't. We do appreciate you buying a ninja system and we always recommend that you purchase from a local dealer as they help to keep the sport going.

Ray
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#103 murk_da_mask

murk_da_mask

    Herp Derp Boston Bawllah Derp Herp

  • Members
  • PipPipPipPipPip
  • 1,417 posts
  • Gender:Male
  • Location:True 617 Boston, MA

Posted 11 March 2009 - 10:18 PM

haha its okay i was just wonderin i wasnt expecting it

Posted Image

Setup:Etek 3 LT,68/45 ninja,rotor,dye i4
~.:Team KaSL:.~
Field: Boston Paintball Indoor
Xbox live Gamertag: PeterxEast


#104 xMTx

xMTx

    It's electric!

  • Members
  • PipPipPipPipPipPip
  • 3,155 posts
  • Gender:Male


Posted 11 March 2009 - 10:20 PM

Can I get one of those Techpb Edition Tanks? I'm going to get a 50/4500 so I'd like to have that. And do I still get the sandana promotion if I get the 50/4500?

Timmy Militia | Elite Gun Owners Club | Planet Eclipse Gewn Owners Club | FEP Quest Owners Club


#105 Kodiak

Kodiak

    Improvise, Adapt, and Overcome

  • Members
  • PipPipPip
  • 715 posts
  • Gender:Male
  • Location:Fayetteville, NC

Posted 11 March 2009 - 11:39 PM

I know this is a loaded question BUT how do your regs compare to the Guerrilla Air Myth reg and the Crossfire reg? I ask because I currently have a Crossfire 70/4500 and I am finding that the Crossfire reg is kinda long. I've changed my ASA and shorted up my setup by about 1/2"-3/4", I'm thinking about changing regs to shorten up my setup even more.

Thx

#106 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 12 March 2009 - 08:30 AM

Can I get one of those Techpb Edition Tanks? I'm going to get a 50/4500 so I'd like to have that. And do I still get the sandana promotion if I get the 50/4500?


All carbon fiber ninja systems ordered from the website comes with a sandana and sak while supplies last. We are running low on them.

i am sorry but the Tech PB lasering was for Mike as a special for him. I wish i could offer it for you but i would then be killed by our production manager.
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#107 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 12 March 2009 - 08:34 AM

I know this is a loaded question BUT how do your regs compare to the Guerrilla Air Myth reg and the Crossfire reg? I ask because I currently have a Crossfire 70/4500 and I am finding that the Crossfire reg is kinda long. I've changed my ASA and shorted up my setup by about 1/2"-3/4", I'm thinking about changing regs to shorten up my setup even more.

Thx


that is a loaded question but one that i will gladly answer.

i would recommend Ninja because;

MADE IN THE USA
Completely rebuildable
Low pressure burst disk
Adjustable output pressure - high, medium and low pressure output
Safety
MADE IN THE USA
Light weight
Small Size
Great customer service ;)
Brass or aluminum bonnet
Order all parts needed on line
9.95 rebuild kit has everything you need
Repair videos
All black look
Stainless steel winding gauge
Mini fill valve
Great response curve
SRT piston- great recharge rate
Did i say MADE IN THE USA :tup:

Ray
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#108 metsfan521

metsfan521

    Senior Member

  • Members
  • PipPipPipPipPip
  • 2,341 posts
  • Gender:Male
  • Location:Brooklyn, NY U.S.A Earth

Posted 16 March 2009 - 06:55 PM

I know this is a loaded question BUT how do your regs compare to the Guerrilla Air Myth reg and the Crossfire reg? I ask because I currently have a Crossfire 70/4500 and I am finding that the Crossfire reg is kinda long. I've changed my ASA and shorted up my setup by about 1/2"-3/4", I'm thinking about changing regs to shorten up my setup even more.

Thx


that is a loaded question but one that i will gladly answer.

i would recommend Ninja because;

MADE IN THE USA
Completely rebuildable
Low pressure burst disk
Adjustable output pressure - high, medium and low pressure output
Safety
MADE IN THE USA
Light weight
Small Size
Great customer service ;)
Brass or aluminum bonnet
Order all parts needed on line
9.95 rebuild kit has everything you need
Repair videos
All black look
Stainless steel winding gauge
Mini fill valve
Great response curve
SRT piston- great recharge rate
Did i say MADE IN THE USA :tup:

Ray



forgot to mention one thing there Ray . . . Ninja paintball supports TechPB!

Edited by metsfan521, 16 March 2009 - 06:55 PM.


#109 Paintballer112893

Paintballer112893

    My Avvy is Butters as a Baby

  • Members
  • PipPipPipPipPip
  • 2,328 posts
  • Gender:Male
  • Location:NorCal

Posted 26 March 2009 - 12:07 AM

Hey Ray!

I just got my tank in the mail and I love it!!! I just have a small problem, and it might be an error on my part. When I got the tank I replaced the Brass with the Aluminum bonnet, then decieded, because the Vice runs better on Low Pressure, to change the shims. There's my Problem, there are only 3 shims, 2 red and 1 thin silver. My question is this, was it shipped wrong, did I make a mistake, or do they only get shipped with 3 shims now? Any help would be great and if indeed I need 2 thin silver ones to have LP I'd love to get it some how.

Thanks!!

-Lucas

Posted Image
Muppets Club Member/Grazi Member #42/Kitty's Bitch for Life Member #1
Feedback +39/-0 Lots of Feedback Positive AND a Player's Club Member! Click me!
You Cannot Deal With ANYONE safer than myself!


#110 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 26 March 2009 - 07:52 AM

Hey Ray!

I just got my tank in the mail and I love it!!! I just have a small problem, and it might be an error on my part. When I got the tank I replaced the Brass with the Aluminum bonnet, then decieded, because the Vice runs better on Low Pressure, to change the shims. There's my Problem, there are only 3 shims, 2 red and 1 thin silver. My question is this, was it shipped wrong, did I make a mistake, or do they only get shipped with 3 shims now? Any help would be great and if indeed I need 2 thin silver ones to have LP I'd love to get it some how.

Thanks!!

-Lucas


Lucas,

This is a very common question that we get about the number of shims in a ninja reg. The red shims provide most of the pressure adjustment, the silver shims provide a very minor adjustment.

Because everything that is made has a tolerance each ninja reg will be slightly different. We test every ninja reg and will put in the silver shims to make sure that the output pressure is correct before it leaves here. Most of the regs will have 2 silver shims, some may only have 1 or some may have 3. This will ensure that every reg goes out at approximately 800 psi. When you adjust the ninja reg just remove or add the red shims as needed and leave the silver shims in the reg. If for some reason you want a lower pressure then 500, 650 or 800 then you can remove the silver shims.

In your case if you remove the 2 red shims and leave the 1 silver shim you will get approximately 500 psi output pressure. If you remove the silver shim this will lower the output pressure more.

Hope this helps and if you have any more questions just post on here.

Ray
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#111 maclovio

maclovio

    Newbie

  • Members
  • Pip
  • 10 posts
  • Gender:Male

Posted 26 March 2009 - 01:03 PM

can i use petroleum jelly to lube the o-rings on the inside of the reg
if i cant can i use spray silicone lube

Edited by maclovio, 26 March 2009 - 01:16 PM.


#112 applesrtastyxD

applesrtastyxD

    Apple Eater

  • Members
  • PipPipPip
  • 309 posts
  • Gender:Male

Posted 26 March 2009 - 04:27 PM

whats the difference betweeen the black tanks and the grey ghost ones?
cuz the grey ghost tank is like 15 bucks cheaper =O
ARE THOSE MY BALLS ON YOUR FACE =D?

I wish i had an ego >< or dm...
(save save save!)

#113 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 26 March 2009 - 04:31 PM

can i use petroleum jelly to lube the o-rings on the inside of the reg
if i cant can i use spray silicone lube


NO.

We recommend ninja lube. If you do not have ninja lube a silicone lube may be used.

Ray

NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#114 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 26 March 2009 - 04:33 PM

whats the difference betweeen the black tanks and the grey ghost ones?
cuz the grey ghost tank is like 15 bucks cheaper =O


the black ninja tanks use the ultra light liner which makes them very light when compared to the grey ghost tank. Also the ninja tanks come with two coats of gel which makes them look fantastic. Also the reg comes with all black fittings and the mini fill valve.

Ray
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#115 applesrtastyxD

applesrtastyxD

    Apple Eater

  • Members
  • PipPipPip
  • 309 posts
  • Gender:Male

Posted 26 March 2009 - 04:43 PM

so the grey ghost tank is heavier ><?
dam it...
ARE THOSE MY BALLS ON YOUR FACE =D?

I wish i had an ego >< or dm...
(save save save!)

#116 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 26 March 2009 - 05:05 PM

so the grey ghost tank is heavier ><?
dam it...


sorry but that is why it is cheaper
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#117 applesrtastyxD

applesrtastyxD

    Apple Eater

  • Members
  • PipPipPip
  • 309 posts
  • Gender:Male

Posted 26 March 2009 - 05:13 PM

how much does the grey ghost weigh(out of curiousity, black color ftw :lol: )
ARE THOSE MY BALLS ON YOUR FACE =D?

I wish i had an ego >< or dm...
(save save save!)

#118 maclovio

maclovio

    Newbie

  • Members
  • Pip
  • 10 posts
  • Gender:Male

Posted 26 March 2009 - 05:14 PM

OK thanks

#119 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 26 March 2009 - 05:18 PM

how much does the grey ghost weigh(out of curiousity, black color ftw :lol: )


i do not have an exact number but i think they are 5 or 6 ounces heavier. If you hold both of them you can notice the difference.
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#120 applesrtastyxD

applesrtastyxD

    Apple Eater

  • Members
  • PipPipPip
  • 309 posts
  • Gender:Male

Posted 26 March 2009 - 05:41 PM

ewww yucky lol
thanks alot ninjapaintball, btw love your tanks i had a 50 cu but it was just too tiny but besides the fact of the size i got, the quality was just EXCEPTIONAL! definetly recommend ur tanks guys =]
ARE THOSE MY BALLS ON YOUR FACE =D?

I wish i had an ego >< or dm...
(save save save!)

#121 Paintballer112893

Paintballer112893

    My Avvy is Butters as a Baby

  • Members
  • PipPipPipPipPip
  • 2,328 posts
  • Gender:Male
  • Location:NorCal

Posted 26 March 2009 - 10:05 PM

Hey Ray!

I just got my tank in the mail and I love it!!! I just have a small problem, and it might be an error on my part. When I got the tank I replaced the Brass with the Aluminum bonnet, then decieded, because the Vice runs better on Low Pressure, to change the shims. There's my Problem, there are only 3 shims, 2 red and 1 thin silver. My question is this, was it shipped wrong, did I make a mistake, or do they only get shipped with 3 shims now? Any help would be great and if indeed I need 2 thin silver ones to have LP I'd love to get it some how.

Thanks!!

-Lucas


Lucas,

This is a very common question that we get about the number of shims in a ninja reg. The red shims provide most of the pressure adjustment, the silver shims provide a very minor adjustment.

Because everything that is made has a tolerance each ninja reg will be slightly different. We test every ninja reg and will put in the silver shims to make sure that the output pressure is correct before it leaves here. Most of the regs will have 2 silver shims, some may only have 1 or some may have 3. This will ensure that every reg goes out at approximately 800 psi. When you adjust the ninja reg just remove or add the red shims as needed and leave the silver shims in the reg. If for some reason you want a lower pressure then 500, 650 or 800 then you can remove the silver shims.

In your case if you remove the 2 red shims and leave the 1 silver shim you will get approximately 500 psi output pressure. If you remove the silver shim this will lower the output pressure more.

Hope this helps and if you have any more questions just post on here.

Ray


Alright, so if I want low pressure I just need to use the one small thin silver shim?? Will it hurt the tank if I only use the 1 shim that was in the reg. Is it also a problem that I changed the brass to the aluminum bonnet, like you said, all the regs are tested, but this one is different now that I have the aluminum. So will there be any repercussions?


Thanks again Ray!!

-Lucas

Posted Image
Muppets Club Member/Grazi Member #42/Kitty's Bitch for Life Member #1
Feedback +39/-0 Lots of Feedback Positive AND a Player's Club Member! Click me!
You Cannot Deal With ANYONE safer than myself!


#122 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 27 March 2009 - 08:04 AM

ewww yucky lol
thanks alot ninjapaintball, btw love your tanks i had a 50 cu but it was just too tiny but besides the fact of the size i got, the quality was just EXCEPTIONAL! definetly recommend ur tanks guys =]


THANK YOU!!!
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#123 In_Dzone

In_Dzone

    Member

  • Members
  • PipPip
  • 244 posts
  • Gender:Male
  • Location:Southern California

Posted 06 April 2009 - 04:13 PM

Just letting you guys know the 2009 NXE elavation Dynasty tank cover fits the 50 ci.I have it on mine and it fits great!

#124 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 06 April 2009 - 04:45 PM

Just letting you guys know the 2009 NXE elavation Dynasty tank cover fits the 50 ci.I have it on mine and it fits great!


thank you and i will pass that along to anyone who asks
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#125 chad

chad

    Sophomore Member

  • Members
  • PipPipPip
  • 618 posts
  • Gender:Male
  • Location:nj

Posted 06 April 2009 - 04:55 PM

where is this gray ghost tank im reading about?

#126 YoungGun32

YoungGun32

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,465 posts
  • Gender:Male
  • Location:Texas

Posted 07 April 2009 - 03:39 PM

i bought yalls 68/4500 tank a good while ago probably about 2 months ago. it is a amazing tank and i love the thing but i never really looked it over to hard when i got it and i did the other day. i noticed a small dent on the bottom of the tank and you can tell that it was done during production and i was wonderin if it was to late for it to be taken care of.

the black coating on the outside has not been scratched or anything that is why i am assuming it was done during manufacturing.

and for everyone that is readin this dont take this as they are a bad company this is one of the top companys in paintball i have delt with!!!!!! companys make mistakes it happens no biggie

PM me plz and ty

Edited by YoungGun32, 07 April 2009 - 03:41 PM.



#127 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 07 April 2009 - 03:44 PM

where is this gray ghost tank im reading about?



the system is a Grey Ghost. it is a plain grey tank with no name brand. The grey ghost is a heavier and does not look as nice, it also does not have the mini fill valve. the grey ghost still has a ninja style regulator which will perform the same.
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#128 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 07 April 2009 - 04:18 PM

i bought yalls 68/4500 tank a good while ago probably about 2 months ago. it is a amazing tank and i love the thing but i never really looked it over to hard when i got it and i did the other day. i noticed a small dent on the bottom of the tank and you can tell that it was done during production and i was wonderin if it was to late for it to be taken care of.

the black coating on the outside has not been scratched or anything that is why i am assuming it was done during manufacturing.

and for everyone that is readin this dont take this as they are a bad company this is one of the top companys in paintball i have delt with!!!!!! companys make mistakes it happens no biggie

PM me plz and ty


Sorry but i see no reason to hide an answer in a PM.

You are correct that the problem was most likely done in production and will not affect performance or safety of the tank in any way.

If you do want to return the system then you can PM all your info to me and i will issue an RA# so that you can send it back in for replacement as long as the bottle is in good condition.

Ray
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#129 YoungGun32

YoungGun32

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,465 posts
  • Gender:Male
  • Location:Texas

Posted 07 April 2009 - 04:19 PM

so it should have no issue with a hydro when it comes time for it even though it is dented?


#130 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 07 April 2009 - 04:26 PM

so it should have no issue with a hydro when it comes time for it even though it is dented?


I cannot guarantee that but any good hydro tester will see that it is under the gel coat and that the gel coat layer is not broken or disturbed.
The best answer that i can give you is that you should send the tank to us when it is ready for hydro. That way i will pass it because i know about the tanks.

Ray
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#131 YoungGun32

YoungGun32

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,465 posts
  • Gender:Male
  • Location:Texas

Posted 07 April 2009 - 05:01 PM

thats what i wanted to know

thanks alot


#132 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 08 April 2009 - 10:57 AM

thats what i wanted to know

thanks alot


No problem, that is why i am here
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#133 jigsaw77

jigsaw77

    Awesomeness

  • Members
  • PipPipPipPipPip
  • 1,204 posts
  • Gender:Male
  • Location:The 925

Posted 04 May 2009 - 02:24 AM

If i buy the additional alluminum bonnet is there any way to ask for it to be installed before i get it? Or do i have to do it myself. I know how i have seen your videos but just kind of lazy. :) Also is there a way i can say i am from Techpb to show that your support is working?


kewlio

Edited by jigsaw77, 04 May 2009 - 02:25 AM.


#134 cld1223

cld1223

    Member

  • Members
  • PipPip
  • 53 posts
  • Gender:Male
  • Location:Moncks Corner, SC

Posted 04 May 2009 - 06:46 AM

My new 50/4500 should be here today... The question I have is this. The order took almost a week longer due to Ninja redoing the regulators to get a better recharge rate. Can you advise what changed?

Thank you

Corey
Charleston 9 & FDNY 343
"Sacrifice Is Meaningless Without Remembrance"

#135 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 04 May 2009 - 07:42 AM

If i buy the additional alluminum bonnet is there any way to ask for it to be installed before i get it? Or do i have to do it myself. I know how i have seen your videos but just kind of lazy. :) Also is there a way i can say i am from Techpb to show that your support is working?


kewlio


If you put that in the special instructions or give us a call then yes we can put that on for you. Also put TECHPB in the special instructions and we will throw in some extra stickers!

Ray
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#136 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 04 May 2009 - 07:45 AM

My new 50/4500 should be here today... The question I have is this. The order took almost a week longer due to Ninja redoing the regulators to get a better recharge rate. Can you advise what changed?

Thank you

Corey


Sorry for the delay but i do not know who told you that we were redoing the regs?

What happened is that the tank manufacturer missed a shipping date and is behind on the tank shipments. We have plenty of regs but we have to wait on the tanks sometimes.

Ray
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#137 EmpirePballer25

EmpirePballer25

    Member

  • Members
  • PipPip
  • 66 posts
  • Gender:Male
  • Location:Mechanicsburg, PA

Posted 04 May 2009 - 09:17 AM

would you know if the ninja 68/4500 would fit a dangerous power g3 stock without a drop forward or adjusting the ASA?



I have a CP micro razor drop forward and my 90/4500 fits fine. If you want I can send pics.
Dangerous Power G3 Blue
- Ninja 90/4500 Tank
- 14" Freak Barrel
- CP Drop Forward
- Empire Reloader B2
- Empire Liquid Harness 4+5 Acid
- Dye Lock Lids

#138 biggysmalls

biggysmalls

    Mandrew

  • Members
  • PipPipPip
  • 560 posts
  • Gender:Male
  • Location:Puerto Rico/born in NJ

Posted 31 May 2009 - 10:59 AM

Hey ray, im in the market for a small 4500 tank, and was thinking about going with the 50 cu boobie. Anyways, I play mostly xball and speedball, is there any benefit of getting the 68 instead? Also, is there a tank cover out there that fits the 50? Thanks!
SLG owners Club- Grammar Nazi # 808- E vents Owners Club-Tech PB NightOwls-Underboring Club- The Halo Clan- Ninja Club
Currently rocking: 09 SLG UL .685 CP one piece, Reloader B, Ninja 50/45, E Vent.[b]
It works 60% of the time, all the time.

#139 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 31 May 2009 - 07:02 PM

Hey ray, im in the market for a small 4500 tank, and was thinking about going with the 50 cu boobie. Anyways, I play mostly xball and speedball, is there any benefit of getting the 68 instead? Also, is there a tank cover out there that fits the 50? Thanks!


Because you mostly play speedball the 50 should be fine because you will be able to fill in between games. Remember that you will only get 800 shots from the 50 but the 68 will get you over 1000 shots. Unless you are a back player the 50 woulds be just fine.

I have been told that the NXE or smart parts tank covers fit the best.

Ray
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#140 cpopp17

cpopp17

    Ballin since 2000

  • Members
  • PipPip
  • 244 posts
  • Gender:Male
  • Location:Boston

Posted 01 June 2009 - 06:46 AM

ray, i have had my ninja for 2 months now ive used it 4 times so far. do i have to worry at all about my tank cracking like in the video that kid posted. is this a problem or was it first seen ith that one kids tank. how does a tank crack?
dye NT
ninja 68/45
dye leopard i4
obey custom rotor
i play at bp everett

#141 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 01 June 2009 - 08:37 AM

ray, i have had my ninja for 2 months now ive used it 4 times so far. do i have to worry at all about my tank cracking like in the video that kid posted. is this a problem or was it first seen ith that one kids tank. how does a tank crack?


Good question but have no fear about your tank. The cracked tank was an isolated incident that we dealt with as with any other situation. At no point in time was the tank unsafe or dangerous to use. The gel coat is a extra layer on the tank that can be completely removed and still pass hydro. As long as you do not damage the fibers under the gel coat it is perfectly safe to use.

If for any reason this should happen just let me know and i will take care of it.

Like i said this was a extreme isolated incident and is no way a major problem or will affect all the ninja tanks and is not unsafe in any way.

Ray
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#142 cpopp17

cpopp17

    Ballin since 2000

  • Members
  • PipPip
  • 244 posts
  • Gender:Male
  • Location:Boston

Posted 01 June 2009 - 04:59 PM

ray, i have had my ninja for 2 months now ive used it 4 times so far. do i have to worry at all about my tank cracking like in the video that kid posted. is this a problem or was it first seen ith that one kids tank. how does a tank crack?


Good question but have no fear about your tank. The cracked tank was an isolated incident that we dealt with as with any other situation. At no point in time was the tank unsafe or dangerous to use. The gel coat is a extra layer on the tank that can be completely removed and still pass hydro. As long as you do not damage the fibers under the gel coat it is perfectly safe to use.

If for any reason this should happen just let me know and i will take care of it.

Like i said this was a extreme isolated incident and is no way a major problem or will affect all the ninja tanks and is not unsafe in any way.

Ray


wow, thanks ray. you are always on top of every question and respond very fast. plus with you, i can tell that you know what you are talking about when it comes to this stuff. you are like the god of hp tanks. see right here people this is y you buy ninja products. they are all about the best. go USA

Edited by cpopp17, 02 June 2009 - 07:09 AM.

dye NT
ninja 68/45
dye leopard i4
obey custom rotor
i play at bp everett

#143 Southpaw

Southpaw

    Junior Member

  • Members
  • PipPipPipPip
  • 920 posts
  • Gender:Male
  • Location:Sacramento, California

Posted 05 June 2009 - 09:14 PM

Ray,
Im trying to find a light 48ish/4500 tank, what is the weight of the Ninja 50? and is that filled or not filled?

#144 EmpirePballer25

EmpirePballer25

    Member

  • Members
  • PipPip
  • 66 posts
  • Gender:Male
  • Location:Mechanicsburg, PA

Posted 05 June 2009 - 10:40 PM

My mini fill valve was faulty out of the box due to a bad o-ring causing air to leak out. Very frustrating, but the standard o-ring for fill valves worked fine which I got from my local shop. Hope this helps anyone with the same problem.
Dangerous Power G3 Blue
- Ninja 90/4500 Tank
- 14" Freak Barrel
- CP Drop Forward
- Empire Reloader B2
- Empire Liquid Harness 4+5 Acid
- Dye Lock Lids

#145 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 06 June 2009 - 09:13 PM

Ray,
Im trying to find a light 48ish/4500 tank, what is the weight of the Ninja 50? and is that filled or not filled?


The ninja 5o cu is approximately 2 lbs 1 oz filled or empty.
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#146 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 06 June 2009 - 09:15 PM

My mini fill valve was faulty out of the box due to a bad o-ring causing air to leak out. Very frustrating, but the standard o-ring for fill valves worked fine which I got from my local shop. Hope this helps anyone with the same problem.


i am sorry to hear that you had a leak right away with the mini fill valve. As i have stated before we do test every reg but things happen in real life that are out of our control. I am happy to hear that you resolved this quickly.

If you pm me i will mail ot a mini fill valve at no charge , sorry for the leak.

Ray
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#147 EmpirePballer25

EmpirePballer25

    Member

  • Members
  • PipPip
  • 66 posts
  • Gender:Male
  • Location:Mechanicsburg, PA

Posted 07 June 2009 - 01:37 AM

The Empire Tank Cover fits my 68/45 pretty well, does Ninja plan on bring out there own tank cover?


Which empire tank cover? I was looking into bottle glove sn
Dangerous Power G3 Blue
- Ninja 90/4500 Tank
- 14" Freak Barrel
- CP Drop Forward
- Empire Reloader B2
- Empire Liquid Harness 4+5 Acid
- Dye Lock Lids

#148 Nicholai

Nicholai

    Junior Member

  • Members
  • PipPipPipPip
  • 930 posts
  • Gender:Male
  • Location:Nelson, BC

Posted 07 June 2009 - 03:11 AM

Hey Ray,

I live in Canada and I am gathering a few users from my forum here to get our tanks rehydro'ed and some of us want the reg swap as well. I had a question on my forum I was unable to answer about the Hydro though. The question goes:

"The other thing I worry about is they are re-hydroing to a DOT test spec, will that pass muster up here? Has anyone re-hydro'd in this area and received a TC re-cert sticker? I have a bad feeling that a DOT re-hydro may not get past the border."

Could you kindly comment on this? I am no expert on the DOT/TC laws and really have no idea. Thanks

-Nick
<div align='center'>

<a href="http://www.southernb...cpaintball.com" target="_blank"><img src="http://i382.photobuc...-signature.gif" border="0" class="linked-sig-image" /></a>
<a href="http://www.youtube.c...ser/sunthief79" target="_blank">Youtube</a> - <a href="http://www.techpb.co...2014&hl=egomag" target="_blank">Egomag Writeup</a> - <a href="http://www.techpb.co...howtopic=34620" target="_blank">Feedback</a> - <a href="http://www.techpb.co...opic=1596&st=0" target="_blank">Cocker Owner #17</a>

</div>

#149 ninjapaintball

ninjapaintball

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,891 posts
  • Gender:Male
  • Location:Crystal Lake, IL

Posted 07 June 2009 - 06:13 PM

Hey Ray,

I live in Canada and I am gathering a few users from my forum here to get our tanks rehydro'ed and some of us want the reg swap as well. I had a question on my forum I was unable to answer about the Hydro though. The question goes:

"The other thing I worry about is they are re-hydroing to a DOT test spec, will that pass muster up here? Has anyone re-hydro'd in this area and received a TC re-cert sticker? I have a bad feeling that a DOT re-hydro may not get past the border."

Could you kindly comment on this? I am no expert on the DOT/TC laws and really have no idea. Thanks

-Nick


Nick,

sorry but i cannot hydro test and TC certify your tanks. That is a separate qualification and we did not take the test for that yet. They are very similar but we would need to get TC cert. first.
NINJA PAINTBALL - PROUDLY MADE IN THE USA
Ninja Paintball Factory Tech
If you have a question please post it in the NINJA/PSI GURU forum
DOT Certified Hydro Tester G777

#150 Nicholai

Nicholai

    Junior Member

  • Members
  • PipPipPipPip
  • 930 posts
  • Gender:Male
  • Location:Nelson, BC

Posted 07 June 2009 - 06:56 PM

Thanks for the quick reply! If you guys ever get that cert please pm me and I can send you some business. Thanks!
<div align='center'>

<a href="http://www.southernb...cpaintball.com" target="_blank"><img src="http://i382.photobuc...-signature.gif" border="0" class="linked-sig-image" /></a>
<a href="http://www.youtube.c...ser/sunthief79" target="_blank">Youtube</a> - <a href="http://www.techpb.co...2014&hl=egomag" target="_blank">Egomag Writeup</a> - <a href="http://www.techpb.co...howtopic=34620" target="_blank">Feedback</a> - <a href="http://www.techpb.co...opic=1596&st=0" target="_blank">Cocker Owner #17</a>

</div>




4 user(s) are reading this topic

0 members, 4 guests, 0 anonymous users