Jump to content


Photo

A5 Box Magazine


  • Please log in to reply
74 replies to this topic

#1 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 31 December 2010 - 07:40 PM

Hey everbody, I just finished a box magazine for my A5. It all started with seeing a video for the new Rap4 box mags, and I decided that I had all the parts I needed for my own. Most of the fabrication is done, All I have left is to cut a hole in the top for a feed port. I'm using the fore grip bolt to hold it on. It works perfectly, and keeps up at 12 bps just fine

Anyways, on to the pictures

Posted Image

Posted Image

Posted Image


Now for the internals.

I'm using what amounts to a Halo v35 drive cone with an invert too board inside. The 7.62 ammo box I got from the surplus store is just wide enough for the feed tray to fit nice and snug inside without having to glue it in. I also built a feedtray out of leftover random wood found in my garage.

Posted Image


Posted Image

Posted Image

Posted Image


So far the only holes I've put in it are for the board and rip drive

Posted Image

Posted Image


I used the foregrip screw and nut to hold it all on. That's the foregrip screw with a washer for added support.

Posted Image


The money shot:

Posted Image

http://www.youtube.com/watch?v=2KavMS6cbsE

Edited by andrewthewookie, 03 May 2012 - 09:04 PM.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#2 xxjoejazzxx

xxjoejazzxx

    I<3 Free Stuff

  • Members
  • PipPip
  • 240 posts
  • Gender:Male
  • Location:Methuen, MA

Posted 31 December 2010 - 08:02 PM

Sexy! Thats really cool.

P.S. FIRSTT
IF YOU ARE UNDER 18 AND PAY FOR YOUR OWN EQUIPMENT PUT THIS ON YOUR SIG.
98% percent of ballers wipe, if your part of the 2% that has some sense of honor add this to your sig
Posted Image

#3 Blarg

Blarg

    "\_(ಠ_ಠ)_/"

  • Members
  • PipPipPipPipPip
  • 1,386 posts
  • Gender:Male
  • Location:United Kingdom

Posted 01 January 2011 - 03:03 PM

Very nice! How many balls does that hold? I believe the RAP4 version holds 200.
Posted Image


#4 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 01 January 2011 - 03:13 PM

Thanks! It'll fit about 400 paintballs total, but anything over 300 paintballs stresses the motor too much. I might put in a little ramp above the drive cone to relieve some pressure on it, but 300 paintballs is heavy enough, I'll probably just leave it at that.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#5 rainmaster9ftw

rainmaster9ftw

    milsim and pump junky

  • Members
  • PipPip
  • 109 posts
  • Gender:Male

Posted 01 January 2011 - 04:24 PM

nice job. May i sudjest painting the tube connection the box to the feedneck black, so it dosen't stand out. Other then that its a really nice looking marker.
Get better or get shot


#6 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 01 January 2011 - 04:28 PM

Pretty much all the fabrication is done, now all I have left to do is make it look pretty. I think I'm just going to paint everything black.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#7 Panda Dentist

Panda Dentist

    lifes a bitch and im her pimp

  • Members
  • PipPipPipPip
  • 752 posts
  • Gender:Male
  • Location:South metro, MN

Posted 01 January 2011 - 11:39 PM

nice

Things used for paintball that can also be used in the household? Re-balls! Strung together re-balls make great anal beads. They also double as garland during the holidays.

Lifes a Bitch and im her pimp.
DOYLE SAYS (when drunk) my number is 612 (removed) i dont give a shit
XBOX 360 BNIB http://www.techpb.co...howtopic=156381

#8 joe32

joe32

    So much stuff for sale someone save me

  • TechPB Players Club
  • PipPipPipPipPipPip
  • 2,717 posts
  • Gender:Male
  • Location:Chicago, IL

Posted 08 January 2011 - 11:23 PM

great!!!! B)

RIP Danijel Jagodic,AKA BORG.

CHEAP Loaders Cheap Empire Axe Azodin KP FEEDBACK +idk, maybe 7

If you saw both PC Nation Fighting Threads put this in your sig


#9 The_Economist

The_Economist

    It's business time.

  • BST Moderator
  • PipPipPipPipPip
  • 2,363 posts
  • Gender:Male
  • Location:NW Indiana

Posted 09 January 2011 - 02:16 AM

^
Posted Image WTF someone jacked my fsjal.

Anyway, that magazine looks like some nice work. I like how it is fully functional, too.

Edited by The_Economist, 09 January 2011 - 02:17 AM.


#10 Mephisto

Mephisto

    Team Inhuman

  • Members
  • PipPipPip
  • 615 posts
  • Gender:Male
  • Location:pennsylvania

Posted 09 January 2011 - 10:02 PM

epic looking gun, if i dont get my woodsball guns sold, i was thinking about doing the same thing with m 2 ammo boxes.
"and if your boys and my boys ever meet on the field in a gunfight... we will fuck you up."


Posted Image
My Feedback link +2/-0

#11 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 09 January 2011 - 10:08 PM

Thanks guys. I haven't really been using my older guns, and I was feeling nostalgic. I thought this would be fun to use during scenarios for shits 'n giggles

Edited by andrewthewookie, 09 January 2011 - 10:13 PM.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#12 Mephisto

Mephisto

    Team Inhuman

  • Members
  • PipPipPip
  • 615 posts
  • Gender:Male
  • Location:pennsylvania

Posted 11 January 2011 - 06:40 PM

question, how did you get everying to stay put in there? like the board and battery pack.
"and if your boys and my boys ever meet on the field in a gunfight... we will fuck you up."


Posted Image
My Feedback link +2/-0

#13 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 11 January 2011 - 07:48 PM

I used hot glue. Enough to hold them in place, but not too permanent if I need to remove anything.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#14 Mephisto

Mephisto

    Team Inhuman

  • Members
  • PipPipPip
  • 615 posts
  • Gender:Male
  • Location:pennsylvania

Posted 11 January 2011 - 10:26 PM

I used hot glue. Enough to hold them in place, but not too permanent if I need to remove anything.



pretty nifty idea. would be an excellent way to make a tripod mounted marker looke more realistic.
"and if your boys and my boys ever meet on the field in a gunfight... we will fuck you up."


Posted Image
My Feedback link +2/-0

#15 TMSballer

TMSballer

    Elite Member

  • BST Moderator
  • PipPipPipPipPipPipPip
  • 6,955 posts
  • Gender:Male
  • Location:IL

Posted 12 January 2011 - 09:52 AM

Wow that's sweet it's an invert too? I didn't read anything besides look at the pictures so if it was posted I'm sorry. I was supprised you should use a warp on itPosted Image with the box mag not that it would be that much different. Oh and how much paint does it hold?

#16 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 12 January 2011 - 11:12 AM

Wow that's sweet it's an invert too? I didn't read anything besides look at the pictures so if it was posted I'm sorry. I was surprised you should use a warp on itPosted Image with the box mag not that it would be that much different. Oh and how much paint does it hold?


It's a v35 drive cone with an invert too board for the sound activation. Completely full it'll hold about 450 paintballs, but past 300 the motor has some trouble. I might build a shelf into the tray to take some pressure off the drive cone, but 300 paintballs is heavy enough as it is, so we'll see.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#17 TMSballer

TMSballer

    Elite Member

  • BST Moderator
  • PipPipPipPipPipPipPip
  • 6,955 posts
  • Gender:Male
  • Location:IL

Posted 12 January 2011 - 06:47 PM

yea that's a good idea so basically it would be making almost like a marble shot? so the paint wouldn't be on the motor at all?

you could also kit a magna upgrade drive I think shop4paintball had them for like 20 if you wanted, just an idea this thing is sweet.

#18 link10983

link10983

    Scouts and Snipers..Who needs them when you have me

  • Members
  • PipPip
  • 87 posts
  • Gender:Male
  • Location:New York

Posted 27 February 2011 - 09:25 PM

Im hating being that one guy who is bringing up an old thread* but I forgot to ask when I viewed this is if you could make a video of this shooting or at least feeding up the paintballs so i see how it works? Im going to be building one for my 98 which im turning into a M249 Saw.

EDIT: Wrong word put in before*/Spelling Error

Edited by link10983, 27 February 2011 - 09:26 PM.

Proud PM5 Owner----------------------Mr.Dorito

Scenario/Rec Prop Builder
When the world shouts for a hero, I will look down to them, and bonus ball them all.
If your under 18 and you buy your own gear, put this in your sig


#19 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 27 February 2011 - 09:30 PM

No worries. I'll put up a vid tomorrow when I have time.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#20 link10983

link10983

    Scouts and Snipers..Who needs them when you have me

  • Members
  • PipPip
  • 87 posts
  • Gender:Male
  • Location:New York

Posted 28 February 2011 - 03:10 AM

Nice. Thanks. Great build by the way.

Proud PM5 Owner----------------------Mr.Dorito

Scenario/Rec Prop Builder
When the world shouts for a hero, I will look down to them, and bonus ball them all.
If your under 18 and you buy your own gear, put this in your sig


#21 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 28 February 2011 - 05:51 PM

I would have gone more in-depth, but my batteries were running low.


RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#22 DarkEgo06

DarkEgo06

    PoFo

  • Members
  • PipPipPip
  • 541 posts
  • Gender:Male
  • Location:Canada

Posted 28 February 2011 - 06:18 PM

thats pretty cool. did you render your foregrip moot by putting the box in the way? can you put it on the side?

#23 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 28 February 2011 - 06:28 PM

Not really. I just have the bi-pod on to make it easier for testing, in a game or scenario I'd take the bi-pod off, and move the grip forwards, allowing me to hold it easier. Besides, the whole thing is on a sling, so at the least I could fire from the hip all day if I wanted to.

I could put it on the side, but the screws that hold the foregrip in place are screwed into plastic, I don't want to put too much stress on them by having the grip on the side.

Edited by andrewthewookie, 28 February 2011 - 06:30 PM.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#24 DarkEgo06

DarkEgo06

    PoFo

  • Members
  • PipPipPip
  • 541 posts
  • Gender:Male
  • Location:Canada

Posted 28 February 2011 - 06:31 PM

nice. cool mod! good stuff. I always like seeing peoples ingenuity on here. It makes it more fun when people DIY their equipment.

#25 link10983

link10983

    Scouts and Snipers..Who needs them when you have me

  • Members
  • PipPip
  • 87 posts
  • Gender:Male
  • Location:New York

Posted 28 February 2011 - 07:21 PM

Nice video, and thanks again. You did a great job on it, after my next pay check its time to get working :P.

Proud PM5 Owner----------------------Mr.Dorito

Scenario/Rec Prop Builder
When the world shouts for a hero, I will look down to them, and bonus ball them all.
If your under 18 and you buy your own gear, put this in your sig


#26 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 28 February 2011 - 07:30 PM

Thanks. You may want to see if you can get a replica box mag off an airsoft site rather than using a 7.62 ammo can. It weighs a ton, It's a bit too wide for my liking, but it's incredibly durable.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#27 ak74freak

ak74freak

    Grade 11 Baller (Fallbrook HS)

  • Members
  • PipPip
  • 225 posts
  • Gender:Male
  • Location:Southern California


Posted 13 July 2011 - 10:02 AM

this is badass you bringing that thing to DON?

#28 Jarz

Jarz

    Workin' that post count back up...

  • Members
  • PipPipPipPipPipPip
  • 3,917 posts
  • Gender:Male
  • Location:Indiana


Posted 13 July 2011 - 10:22 AM

this is badass you bringing that thing to DON?


Necro'd?
Posted Image

#29 Cookybiscuit

Cookybiscuit

    Schadenfreude Fanatic

  • Members
  • PipPipPipPipPipPipPipPip
  • 15,653 posts
  • Gender:Female
  • Location:Mexico


Posted 13 July 2011 - 11:43 AM

Coolest Tippmann I've ever seen :tup:

Awarded: " the biggest dumbass on this forum" 2012


#30 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 13 July 2011 - 12:11 PM

this is badass you bringing that thing to DON?

Yup. I'll definitely be using if for an insertion or two.


this is badass you bringing that thing to DON?


Necro'd?

I think we take a slightly more relaxed view of necros in voided warranty, since there's not much traffic in here.

Coolest Tippmann I've ever seen :tup:

Thanks!

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#31 IwannaWAFFLE

IwannaWAFFLE

    Mad scientist of gun mod ideas

  • Members
  • PipPipPipPipPip
  • 1,395 posts
  • Gender:Male
  • Location:The Island, NYC,NY,United States, Earth, Milky Way Galaxy

Posted 13 July 2011 - 12:35 PM

So did you add those shelves inside the mag? once you do, tell us how it goes, youd probably lose like 10-20 balls (depending on the material you use)..

Immunity to effect, cause, internet porn.


#32 DruidicRifleman

DruidicRifleman

    The Celtic Warrior who BBQ'd your village

  • Members
  • PipPipPipPipPip
  • 2,023 posts
  • Gender:Male
  • Location:Oshitwa ontario

Posted 13 July 2011 - 12:48 PM

Welded steel XD yeah that would be heavy
Current Set up SP1 with a Ninja 90/45 and Velocity And always rocking a Nerf sword
back Up A5 72/30 Pure energy JJ custom barrel

We Killed Humans FOR WE ARE BORG!!!!! RIP In the great PB field in the sky man YOU will BE MISSED!!

Posted Image


#33 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 13 July 2011 - 12:54 PM

So did you add those shelves inside the mag? once you do, tell us how it goes, youd probably lose like 10-20 balls (depending on the material you use)..

I decided to just leave it as is internally for now. As long as I don't fill it to the brim (I can still get about 300-350 in there without stressing the motor), it keeps up perfectly fine.

Welded steel XD yeah that would be heavy

Ya, it is. :D It's so fun to fill it up and just get on the trigger. I probably won't use it that much, but when I do I'll just go plant myself at the front line.

Edited by andrewthewookie, 13 July 2011 - 12:55 PM.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#34 DruidicRifleman

DruidicRifleman

    The Celtic Warrior who BBQ'd your village

  • Members
  • PipPipPipPipPip
  • 2,023 posts
  • Gender:Male
  • Location:Oshitwa ontario

Posted 13 July 2011 - 10:02 PM

With a shorter barrel It would make a very fun tower defence marker I hate hoppers when cooped up in tower taking in coming fire
Current Set up SP1 with a Ninja 90/45 and Velocity And always rocking a Nerf sword
back Up A5 72/30 Pure energy JJ custom barrel

We Killed Humans FOR WE ARE BORG!!!!! RIP In the great PB field in the sky man YOU will BE MISSED!!

Posted Image


#35 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 13 July 2011 - 10:04 PM

Ya, right now I only have the BT super short A5 Apex barrel, and the super long 16" AA Apex Freak front, but now that GOG is bringing back the Freak I think some places have the 12" AA Apex Freak front, which would be a perfect length.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#36 nu2this

nu2this

    Member

  • Members
  • PipPip
  • 104 posts
  • Gender:Male

Posted 17 July 2011 - 12:24 PM

Did you ever finish painting it? Updated pictures????

#37 ThunderLights

ThunderLights

    Turbocharged Member

  • Members
  • PipPipPipPipPipPipPipPip
  • 9,202 posts
  • Gender:Male
  • Location:Tdot

Posted 17 July 2011 - 01:33 PM

do it to your marq...



i didn't say anything...

#38 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 17 July 2011 - 02:21 PM

Did you ever finish painting it? Updated pictures????

I had to put this on the back burner for a while, so all I've actually done is paint the PVC elbow black. I still have to get around to cutting a hole in the top for an easier way to load it.

do it to your marq...



i didn't say anything...

Did you hear something? Lol. Maybe it's time to get a second Marq and try this out. :P

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#39 beastmode986

beastmode986

    Sophomore Member

  • Members
  • PipPipPip
  • 607 posts
  • Gender:Male
  • Location:illinois

Posted 17 July 2011 - 02:57 PM

andrew your awsome

Buy a gun off the street and put it in his gear bag and call the police and tell them he was waving it around threatening to kill everyone....

Posted Image sexy dp fx >http://www.techpb.co...4

#40 DruidicRifleman

DruidicRifleman

    The Celtic Warrior who BBQ'd your village

  • Members
  • PipPipPipPipPip
  • 2,023 posts
  • Gender:Male
  • Location:Oshitwa ontario

Posted 17 July 2011 - 03:08 PM


Did you ever finish painting it? Updated pictures????

I had to put this on the back burner for a while, so all I've actually done is paint the PVC elbow black. I still have to get around to cutting a hole in the top for an easier way to load it.

do it to your marq...



i didn't say anything...

Did you hear something? Lol. Maybe it's time to get a second Marq and try this out. :P


marq tactical
Current Set up SP1 with a Ninja 90/45 and Velocity And always rocking a Nerf sword
back Up A5 72/30 Pure energy JJ custom barrel

We Killed Humans FOR WE ARE BORG!!!!! RIP In the great PB field in the sky man YOU will BE MISSED!!

Posted Image


#41 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 17 July 2011 - 03:10 PM

marq tactical

Now I can justify getting an M-Tac.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#42 DruidicRifleman

DruidicRifleman

    The Celtic Warrior who BBQ'd your village

  • Members
  • PipPipPipPipPip
  • 2,023 posts
  • Gender:Male
  • Location:Oshitwa ontario

Posted 17 July 2011 - 05:28 PM

this one will need the max capacity you should so use the 50 cal can
Current Set up SP1 with a Ninja 90/45 and Velocity And always rocking a Nerf sword
back Up A5 72/30 Pure energy JJ custom barrel

We Killed Humans FOR WE ARE BORG!!!!! RIP In the great PB field in the sky man YOU will BE MISSED!!

Posted Image


#43 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 17 July 2011 - 05:33 PM

andrew your awsome

Thanks! :blush:

this one will need the max capacity you should so use the 50 cal can

Talk about suppressive fire.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#44 ThunderLights

ThunderLights

    Turbocharged Member

  • Members
  • PipPipPipPipPipPipPipPip
  • 9,202 posts
  • Gender:Male
  • Location:Tdot

Posted 17 July 2011 - 05:42 PM

how did you get the tube to convert into the PVC without jamming, and that looks more like a Tiberius than an a5...

#45 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 17 July 2011 - 05:51 PM

how did you get the tube to convert into the PVC without jamming, and that looks more like a Tiberius than an a5...

I didn't really have to do anything. It just sort of sits up in the elbow, and it's never jammed. I figured I'd have to mess with it when I first made it like that, but luckily it's been fine.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#46 turkey357

turkey357

    im Turkalicious

  • Members
  • PipPipPipPipPipPip
  • 3,078 posts
  • Gender:Male
  • Location:southern California

Posted 17 July 2011 - 08:04 PM

hw are you loading balls into it during games? are you taking the whole box off or can it open while still on the marker so you can pour pods in?
Posted Image
are you a Musician? Join the club! click this to get there!--->Musicians Club Here!

#47 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 17 July 2011 - 08:08 PM

I've used it for a few rounds at my local field, and so far I have to open it like a normal ammo can. I'm going to eventually cut a hole in the top and attach the very top of a pod with it's lid, or something like that.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#48 DruidicRifleman

DruidicRifleman

    The Celtic Warrior who BBQ'd your village

  • Members
  • PipPipPipPipPip
  • 2,023 posts
  • Gender:Male
  • Location:Oshitwa ontario

Posted 18 July 2011 - 04:26 AM

make sure it's the widest pod you can get though you could weld a lid onto it to

Edited by DruidicRifleman, 18 July 2011 - 04:31 AM.

Current Set up SP1 with a Ninja 90/45 and Velocity And always rocking a Nerf sword
back Up A5 72/30 Pure energy JJ custom barrel

We Killed Humans FOR WE ARE BORG!!!!! RIP In the great PB field in the sky man YOU will BE MISSED!!

Posted Image


#49 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,111 posts
  • Gender:Female
  • Location:Your bedroom


Posted 18 July 2011 - 12:11 PM

What I might do is cut off the top of one of my old Halo bodies and use that lid system.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 Feedback - 23/0/0


#50 DruidicRifleman

DruidicRifleman

    The Celtic Warrior who BBQ'd your village

  • Members
  • PipPipPipPipPip
  • 2,023 posts
  • Gender:Male
  • Location:Oshitwa ontario

Posted 18 July 2011 - 05:46 PM

that would work
Current Set up SP1 with a Ninja 90/45 and Velocity And always rocking a Nerf sword
back Up A5 72/30 Pure energy JJ custom barrel

We Killed Humans FOR WE ARE BORG!!!!! RIP In the great PB field in the sky man YOU will BE MISSED!!

Posted Image





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users