Jump to content


Photo

DP marker troubleshooting


  • Please log in to reply
No replies to this topic

#1 Yoda

Yoda

    Sophomore Member

  • Members
  • PipPipPip
  • 425 posts
  • Gender:Male

Posted 30 September 2008 - 03:35 PM

Most of the DP markers are similar in a few types of issues, so read this for any problem.

First, change your battery! Even if it was just put in, try a brand new name brand battery.
All of these are to be used after you have tryed a new battery.

G3:
FSDO-Lube lightly with dow 33, or any other paintball lube, hater, lurker etc
Leak from inside trigger frame: Lube the noid lightly with dow 33
Trigger bounce: Adjust trigger so it trips the switch in about the middle, not in the beginning or end
Eye issue: Make sure both eyes are plugged in and no wires are pinched, and are correctly aligned

F8/7:
Leak from breech: Lube valve and poppet, check to make sure valve is still intact
Leak from inside trigger frame: Lube the noid lightly with dow 33
Drop off: Lube HPR(LPR too for F7), lube ram, make sure your tank is fully screwed in
Trigger bounce: Adjust trigger so it trips the switch in about the middle, not in the beginning or end
Eye issue: Make sure both eyes are plugged in and no wires are pinched, and are correctly aligned


Threshold:
FSDO-Lube lightly with dow 33, or any other paintball lube, hater, lurker etc
Leak from inside trigger frame: Lube the noid lightly with dow 33
Trigger bounce: Adjust trigger so it trips the switch in about the middle, not in the beginning or end
Eye issue: Make sure both eyes are plugged in and no wires are pinched, and are correctly aligned


Will add more when they arise, this will greatly help the "help me" threads I think.



Images used in signatures are to be less than Width of 600px, and height of 160px. Only ONE image is allowed in the signature, and it must be 30k or less. Only 5 lines of text are allowed. No text larger then size 2 is allowed in the signature.




2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users