Jump to content


Photo

quest problem


  • Please log in to reply
2 replies to this topic

#1 paintballer008

paintballer008

    Member

  • Members
  • PipPip
  • 189 posts

Posted 21 June 2011 - 04:51 PM

I have my quest that I'm trying to repair, at the moment it is leaking a large amount of air through the solenoid or right before it gets in it. I took apart the frame so I could pin point where the leak was coming from and it was coming through the solenoid. I also tried shooting the gun with the leak and it would shoot a little amount of air like the solenoid was blown.

I bought a noid on here from a guy who said has never used it and put it in and had the same problem. I replaced the bolt o-rings and had the same problem. I have an older board so I don't have a manual to reset it back to stock settings, is there anythings else I should try?

Thanks

#2 hogzilla88

hogzilla88

    Something about narwhals...

  • Members
  • PipPipPipPipPipPip
  • 4,569 posts
  • Gender:Male
  • Location:DFW, TX

Posted 21 June 2011 - 05:13 PM

I have a similar issue with mine, I was told by critical that it was the valve core, only a $12 part.

#3 paintballer008

paintballer008

    Member

  • Members
  • PipPip
  • 189 posts

Posted 21 June 2011 - 06:05 PM

let me know if that works




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users