It works fine, I haven't chronoed it, but it should be around 300 fps or so. It has a surprisingly good pump stroke considering that I made the whole thing in my garage. The pump handle is made of red cherry stained red mahogany, it also has matching grips. All of the wood has a polyurethane protective coating on, a little dinged up, but noting a little sand paper and a fresh coat wouldn't fix. It also has a metal trigger frame in case you decide to ditch the scratched up paint job and just polish it. The trigger is a single trigger modded to a double trigger frame, and as such the safety is not functional. The valve is not a modified spyder valve. I found that if you follow viking vick's guide and modify the valve pin, the jb weld shatters after repeated contact with the striker. To fix this I used a brass eagle avenger valve, which is similar in functionality, but has a slightly different recocking mechanism which makes it much better suited to modifying into a pump valve. Normally I use 12 grams, as seen in a couple of the pics, but the 12gram changer will not be included. The 7oz tank and the pocket hopper will also not be included. I sometimes run the tank vertically, it can hold up to a 9oz without problems. If you like I can include the Stock asa which has been modified to take regular 1/8in. NPT threads. It currently has some 11in no name barrel on it, I can add a 16in j&J ceramic for an extra $10.The breach has been milled to accept first strike rounds if you remove the stove pipe.
I'm asking $45 for just the gun. +$10 if you want the J&J ceramic. Shipping is on me. Hopper, 12gram changer and 7oz tank not included