Jump to content


Photo

Axe dosnt work with prophecy ltd


  • Please log in to reply
6 replies to this topic

#1 Thizzalot

Thizzalot

    Newbie

  • Members
  • Pip
  • 1 posts

Posted 11 October 2011 - 10:59 PM

So I just got my Axe and a new prophecy LTD and the axe is to quiet to use the sounds mode. I have the sound set a high as it can go. HELP



#2 drunkenpriest

drunkenpriest

    I relax 8 days a week.

  • Members
  • PipPipPipPipPip
  • 1,666 posts
  • Gender:Male

Posted 12 October 2011 - 12:43 AM

that weird i hava mini with a too and it works
Posted Image

#3 misterkyle

misterkyle

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,059 posts

Posted 21 December 2011 - 11:27 PM

change settings on prophecy

#4 littleloopy15

littleloopy15

    Master Member

  • Members
  • PipPipPipPipPipPip
  • 3,116 posts
  • Gender:Male
  • Location:New York


Posted 21 December 2011 - 11:31 PM

just scream every time you want to shoot :dodgy: haahaha
but yeah are you sure that you have the prophecy all the way up? my friends use their prophecys and axes and they work fine.

Feedback 17/0/0
Setup- Luxe, Rotor v3, ProFlexes, Ninja 68/45
Checkout LibertyPaintball-NY.com


#5 Jarz

Jarz

    Workin' that post count back up...

  • Members
  • PipPipPipPipPipPip
  • 3,917 posts
  • Gender:Male
  • Location:Indiana


Posted 22 December 2011 - 11:53 AM

My Z2 (and sound activated Invert TOO) work fine with my Axe...
Posted Image

#6 Eskimo

Eskimo

    Member #: 666 ( Seriously )

  • Members
  • PipPipPipPipPipPipPip
  • 6,110 posts
  • Gender:Male
  • Location:Whitby

Posted 22 December 2011 - 12:10 PM

use has manuel?

Reads das manuel

you dont?

http://www.paintball...ual_w_cover.pdf

The Prophecy Loader is defaulted to Sound Activation. Simply turn the
Prophecy Loader on and check that the loader is being activated by the sound
of your marker. If necessary you can adjust the sound sensitivity level to match
your markers sound signature. See the Board Function section for more details
on changing the sensitivity.



Sound Sensitivity - 6 levels of adjustment, level (1) being the least sensitive and
level (6) being the most sensitive.
Note:
It is better to have the microphone setting less sensitive and still able to detect
the marker firing. Do not set it to 6 if setting 2 detects the marker firing
correctly. Only use a higher setting if the lower setting does not detect the
marker firing.



Page 15 describes how to change the settings on your loader.

make sure to always set it when shooting paint physically at the range.
and most people can get their loader to sound activate at setting 3
not sure why yours wont work.

Edited by Eskimo, 22 December 2011 - 12:11 PM.

Citrus Connection
Proudly Partnered With: PBL, TechPB, Pinokio Hoppers, HK·Army


#7 DrewaV

DrewaV

    Master Member

  • Members
  • PipPipPipPipPipPip
  • 2,881 posts
  • Gender:Male
  • Location:Southern California


Posted 23 December 2011 - 12:39 AM

use has manuel?

Reads das manuel

you dont?

http://www.paintball...ual_w_cover.pdf



The Prophecy Loader is defaulted to Sound Activation. Simply turn the
Prophecy Loader on and check that the loader is being activated by the sound
of your marker. If necessary you can adjust the sound sensitivity level to match
your markers sound signature. See the Board Function section for more details
on changing the sensitivity.



Sound Sensitivity - 6 levels of adjustment, level (1) being the least sensitive and
level (6) being the most sensitive.
Note:
It is better to have the microphone setting less sensitive and still able to detect
the marker firing. Do not set it to 6 if setting 2 detects the marker firing
correctly. Only use a higher setting if the lower setting does not detect the
marker firing.



Page 15 describes how to change the settings on your loader.

make sure to always set it when shooting paint physically at the range.
and most people can get their loader to sound activate at setting 3
not sure why yours wont work.


Lolz to this thread. All you do bud is up the mic volume look at the manual above.




5 user(s) are reading this topic

0 members, 5 guests, 0 anonymous users