Everyone has been there, trying to figure out what size to get for their soft goods only to realize the size they ordered was either too small or too large. Lets face it, almost, if not every, company makes their products differently so no two companies can have the same sizes. I found the sizing charts for Dye, Valken, Empire, Invert, BT, PE. It may be off a little, but this is a much better idea than just guessing. Hope this helps!
1. To get the best fit, use a flat tape measure and have someone help you.
2. Stand naturally and keep the measuring tape comfortably loose.
3. If you're unsure of your measurements, always go one size larger to allow for movement, elbow pads, and under armor.
Measure your chest an inch below the arm pit across to the other armpit.
Standing up straight, measure from your crotch straight down the inside of your leg to the top of your foot.
Measure your waist circumference at the height you prefer to have your waistband.
Measure your arm length from the centre of your back/neck to the desired cuff position.
Find a pair of pants that fit you as desired and measure from the bottom of the crotch to the bottom of the leg. For shorts measure from the crotch to the desired length.
Measure the overall length from the top of the waist down one side of your leg.
EMPIRE SIZING CHARTS
Edited by blckninja, 28 January 2016 - 05:02 AM.