Jump to content


Photo

G6R


  • Please log in to reply
3 replies to this topic

#1 TooTallNiCo

TooTallNiCo

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,577 posts
  • Gender:Male
  • Location:Pleasant Prairie, WI

Posted 23 March 2012 - 08:14 AM

I know its recommended to use a low pressure output on the G6R. But if I can avoid it I'd rather not spend $50 to put a new reg on my tank. I currently have the standard ninja reg on my tank, which I can adjust down to about 450psi output. Is that low enough?

Member of the Brew City Bomb Squad
Check us out here at Brew City Bomb Squad Paintball
Veteran of Living Legends V, VI

CPX Legion: My Name is Legion, For We Are Many..


#2 epikfailpaintball

epikfailpaintball

    Sophomore Member

  • Members
  • PipPipPip
  • 376 posts
  • Gender:Male
  • Location:Cincinnati, Ohio

Posted 23 March 2012 - 08:54 AM

Yes. I also have a G6R. Standard high pressure is around 850 psi output. Standard Ninja regs ( like I have) can go down to about 500 psi. That's low pressure. The G6R is ABLE to perform at super low pressure like the SLP reg at 250 psi. So all in all it's ok to run at that output pressure. Hope this helps! :D

Edit: also Mike the big man himself ran his G6R at I think 600 psi output for his gun review and played with it and it was fine :tup:

Edited by epikfailpaintball, 23 March 2012 - 08:56 AM.


#3 Steve

Steve

    Hurts your pride more than your body

  • Members
  • PipPipPipPip
  • 844 posts
  • Gender:Male
  • Location:Richmond, RI

Posted 16 April 2012 - 04:24 PM

Yep, you're fine. Just remove the shims from the Ninja reg, adjusting it down to Low pressure. The G6r can run at high pressures, however, that runs a higher risk of breaking some of the interior seals in the marker.
<div align='center'><img src="http://inlinethumb51...600x600Q85.jpg" border="0" class="linked-sig-image" />
</div><div align='center'><a href="http://www.techpb.co...howtopic=13772" target="_blank">PMR Owners Group</a> | <a href="http://www.techpb.co...showtopic=1302" target="_blank">Timmy Militia</a> | <a href="http://www.techpb.co...howtopic=39714" target="_blank">NE Ballers</a>
Muppet #60
</div><div align='center'><b>I never fail, I just succeed at finding what doesn't work</b>
Goggles are a mandatory safety device, as necessary to the sport
as a space suit is to the guy going out to fix the Hubble Telescope. ~TWB
</div>

#4 The Vanilla Gorilla

The Vanilla Gorilla

    Newbie

  • Members
  • Pip
  • 4 posts

Posted 13 June 2012 - 10:10 AM

I agree LP is acceptable, SLP is more efficient, but unnecessary




2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users