Jump to content


Photo

Sniper Build


  • Please log in to reply
4 replies to this topic

#1 The Crazy Cow

The Crazy Cow

    Sophomore Member

  • Members
  • PipPipPip
  • 463 posts
  • Gender:Male
  • Location:Oshawa Ontario, Canada

Posted 26 March 2012 - 08:40 PM

I decided I wanted to build a sniper intead of ordering a CCM (more personal). I have a few questions.

1. What grip frame do you recomend? Would I look for a slide trigger frame or get an 86.

2. What lower tube internals are better Check It internals or CCM internals.

3. This is just for opinion because I can't decide what body to get.

This:
http://paintballgate...p2k5prboki.html

or This:
http://paintballgate...miorbokit1.html

Edited by The Crazy Cow, 26 March 2012 - 09:11 PM.

Moo.

#2 PBKidKill

PBKidKill

    Fishy ><> :)

  • Members
  • PipPipPip
  • 386 posts
  • Gender:Male
  • Location:Sacromento,CA

Posted 26 March 2012 - 08:51 PM

one why raw bodies.

Two 86* frame

three ccm internals
Four you want just to buy the full autotrigegr kit from ccm,

Five
have fun

Looking for a Mech Autococker - http://www.techpb.co...howtopic=221133

Put this in your sig if your under 18 and pay for all of your own gear.


#3 The Crazy Cow

The Crazy Cow

    Sophomore Member

  • Members
  • PipPipPip
  • 463 posts
  • Gender:Male
  • Location:Oshawa Ontario, Canada

Posted 26 March 2012 - 09:04 PM

one why raw bodies.



Because if possible a custom anno.
Moo.

#4 hogzilla88

hogzilla88

    Something about narwhals...

  • Members
  • PipPipPipPipPipPip
  • 4,569 posts
  • Gender:Male
  • Location:DFW, TX

Posted 26 March 2012 - 09:08 PM

1. Personal preference.

2. I'd get either CCM out of the two, but I'd go with AKA for efficiency.

3. I'd get none of those...find a nice non-WGP body (freeflow, BBT/ST, Belsales, etc), WGP bodies are pretty ugly for the most part (except the karni, jole, and vertabrae), and extremely common.

Edited by hogzilla88, 26 March 2012 - 09:33 PM.


#5 drg

drg

    Junior Member

  • Members
  • PipPipPipPip
  • 852 posts


Posted 27 March 2012 - 03:31 PM

1. Whatever you can get within your price range ... 45 sliders, hopefully metal construction, are well priced choices. Can't go wrong with CCM frames, maybe Sanchez frame? I have not used one of those.

2. Depends if you want the CCM valve or not, if not then the rest doesn't matter that much. Many people like CCM for simplicity, as in you buy one time and everything works together.

3. Of those two, the first one, avoid mini bodies if you can, unless you really like orracles. But keep in mind that those bodies are unanodized and you sure as hell can't get it anodized for $10, so you may want to consider one of the already anodized bodies.
Keep your pump hand strong!
PUMPPB.COM TIGHTSTICK - Custom LAPCO 1-piece underbore barrel! SALE!
PUMPPB.COM - Pump paintball forums
HawaiiPB.com - Paintball forums for the state of Hawaii
HawaiiPB/PumpPB - Our videos




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users