Jump to content


Photo

Quest Board Issue


  • Please log in to reply
No replies to this topic

#1 NotaSniper

NotaSniper

    Sophomore Member

  • Members
  • PipPipPip
  • 646 posts

Posted 08 May 2012 - 11:52 PM

Just picked up an OG Quest. It is in very good condition but I have noticed a strange issue. It's in semi right now. Has 2.2 Inoviq board. Sometimes, with or without air, when you pull the trigger it will go off multiple times. At first I thought it was bounce but I can get it to do it without air too. Sometimes I can mess with it for an hour and not get it to do it. Sometimes first pull it does it. Replaced battery, havn't gotten to far into the board programing yet. Any ideas?

Update, downloaded the inoviq manual in the "Quest Information Thread" only to find that my quest does not have that flash version. It looks identical to the board in the picture. Where can I get a manual? It's program mode is mcuh different. All I want to do is reset the thing to see if my issue goes away. It will be my semi only shooter anyway.

Edited by NotaSniper, 13 May 2012 - 02:05 PM.





2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users