Jump to content


Photo

Dye Hyper 2 fart leak.


  • Please log in to reply
6 replies to this topic

#1 dannyboy768

dannyboy768

    TOMA ABBIATI

  • Members
  • PipPipPipPipPip
  • 2,028 posts
  • Gender:Male
  • Location:Orlando, Florida


Posted 18 August 2012 - 01:18 PM

Ok so I tried replacing the 2 o-rings on the stem, the o-ring inside the stem, the big piston o-ring, the velocity adjustment screws o-ring (I tried sizes 009 and 010), and I flipped over the velocity screw seat. I also made sure my shims are in order and I cleaned and lubed (Dow 33) the enitre reg and every o-ring. It still leaks (farts).

Heres a video:



Sorry for the shaking at the beginning I dont know why I shook the camera so much.
DIRT CHEAP CF Tanks in Hydro!

http://shop.swapmytank.com/

#2 cybermaniac15

cybermaniac15

    Elite Member

  • Members
  • PipPipPipPipPipPipPip
  • 5,450 posts
  • Gender:Male
  • Location:Southern-California

Posted 18 August 2012 - 02:00 PM

I've never seen that before. I'd try googling farting hyper 2 and see if any other threads come up, or just contact dye.

Edited by cybermaniac15, 18 August 2012 - 02:00 PM.


#3 brian23

brian23

    Member

  • Members
  • PipPip
  • 265 posts

Posted 18 August 2012 - 02:06 PM

try the reg on another gun and see if that still happens

Edited by brian23, 18 August 2012 - 02:07 PM.


#4 Steel546

Steel546

    Drupaler.

  • Members
  • PipPipPipPip
  • 764 posts
  • Gender:Male
  • Location:North Texas

Posted 18 August 2012 - 07:37 PM

Did it just randomly start doing that? What would happen if you just turn it three turns out and THEN turn your ASA on? Do you have the right number of shim? (Never know, sometimes you just lose them when you clean it).

I'd say it's either the seat or the shims based on the video, but it's a tough call without actually seeing it.

#5 Impulse3159

Impulse3159

    Member

  • Members
  • PipPip
  • 282 posts

Posted 19 August 2012 - 07:06 AM

Rebuild it with the manual. Maybe somethings upside down or shim are incorrect

#6 dannyboy768

dannyboy768

    TOMA ABBIATI

  • Members
  • PipPipPipPipPip
  • 2,028 posts
  • Gender:Male
  • Location:Orlando, Florida


Posted 19 August 2012 - 04:31 PM

Ok I fixed it, the stem o-ring wasnt quite inside the groove so it would keep falling out and stick to the top of the reg seat.
DIRT CHEAP CF Tanks in Hydro!

http://shop.swapmytank.com/

#7 REDCOBRA

REDCOBRA

    wow such paintball

  • Members
  • PipPipPipPipPip
  • 1,531 posts
  • Gender:Male
  • Location:Canada

Posted 19 August 2012 - 06:51 PM

That video was super trippy , it was like watching CGI video back in the 90's LOL

Posted Image





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users