You can if you want.
why can't you use sl33k on a marq 6?
TechPB recommended Marq & Intimidator Settings
Posted 25 January 2012 - 05:25 PM
Awarded: " the biggest dumbass on this forum" 2012
Posted 26 January 2012 - 01:48 PM
Bolt Delay @
I just found out that sl33k is dow 33. I apologize for the stupid question I previously asked.
Edited by MedevilMIke, 28 January 2012 - 10:13 AM.
Posted 24 April 2012 - 07:57 AM
Posted 27 April 2012 - 06:52 AM
I saw that you tuned a Bob long Mtac on your youtube video. Video was for the Techpb barrel.
Can you please share does settings if you have them written down, I can't find any good settings for the marker.
Mtac has the frenzy 4.0 board.
Alright, here are some of my recomended settings for the Marq
LPR @ 80 to 85 psi (I run at 85psi for new guns, then drop down to 80psi after 30 cases)
HPR around 220psi (whatever to chrono)
Dwell @ 8ms
I usually lube the gun with lurker lube or mineral oil. If the gun is older, I use dow55
These guns are pretty tolerant so you can experiment
For the Alias-
Here are the Rendition Alias Settings-
LPR @ 80psi
Dwell @ 9ms
Debounce @ 6ms
MBounce @ 1ms
.693 CP Barrel 14" Classic
Clear Spyder Detents from Ebay
Dow55 on everything
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users