Jump to content


PM8 LPR Shim Stack

  • Please log in to reply
No replies to this topic

#1 nonameputs



  • Members
  • Pip
  • 1 posts

Posted 23 September 2012 - 09:25 PM

So I just got this PM8 and took the whole thing apart to clean/re-lube everything. I took the LPR out and noticed that I had an extra shim in the stack. According to the manual, the shim stack is supposed to look like this:


Mine looked like this:


The bold ones are the larger shims.

I've also read that some people have to run their LPR at 4-5 turns out as opposed to the suggested 2.5-3 turns out. Could this have something to do with an extra shim in the stack?

Edited by nonameputs, 23 September 2012 - 09:29 PM.

2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users