Jump to content


Photo

g6r help


  • Please log in to reply
6 replies to this topic

#1 5ozofpain

5ozofpain

    FUS RO DAH

  • Members
  • PipPipPipPipPipPip
  • 4,170 posts
  • Gender:Male
  • Location:San Diego, California


Posted 16 November 2012 - 11:50 PM

so my g6r has a problem. once i start to walk the trigger fast, it wont stop shooting even once a let go of the trigger. its not the trigger or anything because this only happens with air on.

Feedback I LE AXE 

EKK ELITE


#2 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 21,994 posts
  • Gender:Female
  • Location:Your bedroom


Posted 16 November 2012 - 11:54 PM

Sounds like your trigger is bouncing.

RebelSignaturejedicode-1.jpg
Hybrid SFT 09 Impulse HB REV-i Macroless Mech Ion
Rotor Grillz PE 70/45 Feedback - 23/0/0

Closer & Angel A1 F/S/T


#3 5ozofpain

5ozofpain

    FUS RO DAH

  • Members
  • PipPipPipPipPipPip
  • 4,170 posts
  • Gender:Male
  • Location:San Diego, California


Posted 16 November 2012 - 11:56 PM

Sounds like your trigger is bouncing.


how do i fix it? and it only does it when air is in if that changes anything

Feedback I LE AXE 

EKK ELITE


#4 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 21,994 posts
  • Gender:Female
  • Location:Your bedroom


Posted 17 November 2012 - 12:06 AM

Yes, that's normal. It's the recoil of the gun's bolt that is causing the trigger to trip the microswitch on its own. Either increase pre-travel, move the activation point further away from the microswitch, increase the tension, or a combination of all three.

Edited by andrewthewookie, 17 November 2012 - 12:06 AM.

RebelSignaturejedicode-1.jpg
Hybrid SFT 09 Impulse HB REV-i Macroless Mech Ion
Rotor Grillz PE 70/45 Feedback - 23/0/0

Closer & Angel A1 F/S/T


#5 kingJurzy

kingJurzy

    OFFICIAL TechPB's best member 2012

  • Members
  • PipPipPipPipPipPipPipPip
  • 9,071 posts
  • Gender:Male
  • Location:Bay Area, California


Posted 17 November 2012 - 12:08 AM


Sounds like your trigger is bouncing.


how do i fix it? and it only does it when air is in if that changes anything


Yes you have a bouncy trigger.


Make sure you have a good spring tension and back out the trigger so it is not a hair pull. Adjust it so it is farther away from the switch and adjust the set screw all the way on the bottom of the trigger out so you have a longer trigger pull.

FEEDBACK: 23/0/0


#6 5ozofpain

5ozofpain

    FUS RO DAH

  • Members
  • PipPipPipPipPipPip
  • 4,170 posts
  • Gender:Male
  • Location:San Diego, California


Posted 17 November 2012 - 12:28 AM

thanks guys it worked

Feedback I LE AXE 

EKK ELITE


#7 kingJurzy

kingJurzy

    OFFICIAL TechPB's best member 2012

  • Members
  • PipPipPipPipPipPipPipPip
  • 9,071 posts
  • Gender:Male
  • Location:Bay Area, California


Posted 17 November 2012 - 12:34 AM

That is what we are here for.

FEEDBACK: 23/0/0





2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users