Posted 17 November 2012 - 12:06 AM
Edited by andrewthewookie, 17 November 2012 - 12:06 AM.
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 • Feedback - 23/0/0
Fear is the mind-killer
Posted 17 November 2012 - 12:08 AM
Sounds like your trigger is bouncing.
how do i fix it? and it only does it when air is in if that changes anything
Yes you have a bouncy trigger.
Make sure you have a good spring tension and back out the trigger so it is not a hair pull. Adjust it so it is farther away from the switch and adjust the set screw all the way on the bottom of the trigger out so you have a longer trigger pull.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users