Jump to content


Photo

Freak Style difference


  • Please log in to reply
13 replies to this topic

#1 get.lit.up!

get.lit.up!

    200lb of unpredictable coming to hunt ya ;)

  • Members
  • PipPipPipPipPipPip
  • 3,538 posts
  • Gender:Male

Posted 13 December 2012 - 11:25 PM

I remeber this one on my 98C where you have to put it through the tip side and after the tip is secured there is nowhere for the insert to go. And wasn't there .5-1' of aluminum before it reached the insert which was beneficial for the bolt not wearing?

Posted Image

And isnt this one the only style that ANSGear sell now, and is maybe inferior to the above style? I've also notice that the super freaks have this styled back too. This style slides out through the back of the back
Posted Image

I'm using this on my CCM when I do buy it so what would be a better buy? I guess I also need one for my mini too
gnUDL.png
See my about me for useful things like feedback!

#2 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 21,856 posts
  • Gender:Female
  • Location:Your bedroom


Posted 13 December 2012 - 11:27 PM

I believe that style on the 98 is specific to the 98, all "normal" freak backs are open to the insert from the front and back.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 • Feedback - 23/0/0

Fear is the mind-killer


#3 get.lit.up!

get.lit.up!

    200lb of unpredictable coming to hunt ya ;)

  • Members
  • PipPipPipPipPipPip
  • 3,538 posts
  • Gender:Male

Posted 13 December 2012 - 11:37 PM

but is there an advantage or pros to finding the first one in A/C threads? damn I cant remember that site claiming bolt wear without that extra space before insert
gnUDL.png
See my about me for useful things like feedback!

#4 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 21,856 posts
  • Gender:Female
  • Location:Your bedroom


Posted 13 December 2012 - 11:39 PM

My point is, you can't find it the way you're describing unless it's in 98 threads. If you're going to put it on something other than 98 threading, it'll be the standard internal style.

The outside looks are irrelevant to the function of the back. The way the Tippmann works, it needs that inner collar of metal because the threading is not big enough for an internal bore that the insert could fit in.

Edited by andrewthewookie, 14 December 2012 - 12:57 PM.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 • Feedback - 23/0/0

Fear is the mind-killer


#5 Pakistani

Pakistani

    www.AliZaman.com

  • Members
  • PipPipPipPipPip
  • 2,237 posts
  • Gender:Male
  • Location:Richmond, VA

Posted 14 December 2012 - 12:03 AM

I believe that style on the 98 is specific to the 98, all "normal" freak backs are open to the insert from the front and back.


totally wrong.

the first style is just an older version of the freak. the 2nd one you posted is the newer version.

KPS Paintball VCU Rams Richmond Rage

If you need help with a Dye gun, PM me!


#6 get.lit.up!

get.lit.up!

    200lb of unpredictable coming to hunt ya ;)

  • Members
  • PipPipPipPipPipPip
  • 3,538 posts
  • Gender:Male

Posted 14 December 2012 - 12:03 AM

Will the mini or CCM cause any wear in the insert due to the bolt?

Also if I buy a .684, .679, .675 inserts in SS, .670 in brass will I be good for most paint? I already own a AA back (.689) and invert barrel (.691, probably needs replacing has hairline scratches)
gnUDL.png
See my about me for useful things like feedback!

#7 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 21,856 posts
  • Gender:Female
  • Location:Your bedroom


Posted 14 December 2012 - 12:05 AM


I believe that style on the 98 is specific to the 98, all "normal" freak backs are open to the insert from the front and back.


totally wrong.

the first style is just an older version of the freak. the 2nd one you posted is the newer version.

I was not talking about visual style, but merely the differences between the inside of a 98 Freak back and other Freak backs.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 • Feedback - 23/0/0

Fear is the mind-killer


#8 Pakistani

Pakistani

    www.AliZaman.com

  • Members
  • PipPipPipPipPip
  • 2,237 posts
  • Gender:Male
  • Location:Richmond, VA

Posted 14 December 2012 - 12:07 AM



I believe that style on the 98 is specific to the 98, all "normal" freak backs are open to the insert from the front and back.


totally wrong.

the first style is just an older version of the freak. the 2nd one you posted is the newer version.

I was not talking about visual style, but merely the differences between the inside of a 98 Freak back and other Freak backs.


ah ok, gotcha :tup:

KPS Paintball VCU Rams Richmond Rage

If you need help with a Dye gun, PM me!


#9 get.lit.up!

get.lit.up!

    200lb of unpredictable coming to hunt ya ;)

  • Members
  • PipPipPipPipPipPip
  • 3,538 posts
  • Gender:Male

Posted 14 December 2012 - 08:48 AM

So I'm taking that the new styled ones are still ok or shoul I be taking this to mcb?
gnUDL.png
See my about me for useful things like feedback!

#10 Steephill

Steephill

    Dota 2 > Life itself

  • Members
  • PipPipPipPipPipPip
  • 3,471 posts
  • Gender:Male
  • Location:Ft Worth, TX

Posted 14 December 2012 - 08:51 AM

So I'm taking that the new styled ones are still ok or shoul I be taking this to mcb?


New style one is fine, internally they'll be the same for a autococker threaded back.

My Feedback +14/-0

`kook 2/1/12 "The gold standard isn't what is most popular. By that logic, Justin Beiber is the gold standard of music."


#11 slinkyaroo

slinkyaroo

    Yes, I'm old. Yes, I'm cranky.

  • Root Admin
  • PipPipPipPipPipPip
  • 4,835 posts
  • Gender:Male
  • Location:Belleville, Ontario

Posted 14 December 2012 - 09:21 AM

The first pic is the old backing. It also came in stainless steel. The second one came out in 2k5. A third one is the freak JR. All the same except milling.

Freak backs do come in different lengths to accommodate the thread types. Some have the insert the full length like cockers and some don't because the thread bore is smaller to insert into the marker (A5 I think) so the insert doesn't remove from the back portion.

#12 riddler

riddler

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,082 posts
  • Gender:Not Telling

Posted 14 December 2012 - 11:16 AM

The first pic is the old backing. It also came in stainless steel. The second one came out in 2k5. A third one is the freak JR. All the same except milling.

Freak backs do come in different lengths to accommodate the thread types. Some have the insert the full length like cockers and some don't because the thread bore is smaller to insert into the marker (A5 I think) so the insert doesn't remove from the back portion.



Also Automag, being bore drop.

#13 get.lit.up!

get.lit.up!

    200lb of unpredictable coming to hunt ya ;)

  • Members
  • PipPipPipPipPipPip
  • 3,538 posts
  • Gender:Male

Posted 14 December 2012 - 06:37 PM

Will the mini or CCM cause any wear in the insert due to the bolt?

Also if I buy a .684, .679, .675 inserts in SS, .670 in brass will I be good for most paint? I already own a AA back (.689) and invert barrel (.691, probably needs replacing has hairline scratches)


gnUDL.png
See my about me for useful things like feedback!

#14 asthmaticrhino

asthmaticrhino

    Skyrockets in flight! Beeewwww

  • Members
  • PipPipPipPipPip
  • 1,159 posts
  • Gender:Male

Posted 14 December 2012 - 11:58 PM


Will the mini or CCM cause any wear in the insert due to the bolt?

Also if I buy a .684, .679, .675 inserts in SS, .670 in brass will I be good for most paint? I already own a AA back (.689) and invert barrel (.691, probably needs replacing has hairline scratches)

Can't say about a mini, but I use my t2 and my dealywinds without problems :)
Feedback: +3/0/0 Etek 3 LT LNIB

Protip. Buy a shovel. Dig and Pile REPEAT until desired effect is achieved. Builds upper body and character. Bitches love upper body and character.





2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users