Marker: Nasty SFT Shocker
Condition: Cosmetic: 8/10 Technical 3/10
Upgrades: See list below
Known Problems: Weird velocity fluctuations (shoots fine, then after I fill my tank again it starts jumping up as high as 320 and then low enough that it wont cycle
Asking Price: $150 PP'd and shipping. for the whole lot OR BEST OFFER (meaning if you dont like the price, make an offer, I need this stuff gone)
Shipping Options: whatever you want
Trades of interest: None
Location of item: Moncton, NB Canada
What is Included:
-Trinity Clamping feedneck (on the gun)
-HE Bolt (In the gun)
-HE chamber (In the gun)
-HE bolt guide (In the gun)
-HE sleeve (In the gun)
-CP Reg (On the gun)
-NXT Frame (On the gun)
-VP Trgger (On the gun)
-Dye ASA (On the gun)
-14inch AA freak with 0.691 insert (On the gun)
-Polished Strange SFT body (Front body screw is stripped and leaking)
-Stock Nasty Reg
-Polished SFT frame
-Red SFT frame
-Dye sticky grips
-Stock bolt guide
-Black NXT trigger
-Red Nasty SFT trigger
-Silver SFT trigger
-Cocker to Socker barrel thread changer
-Shocker o-ring kit
The Nasty SFT airs up without any leaks and cycles fine. once I refill my tank I start to see crazy velocity fluctuations, tried messing around with it, but can't be bothered to now.
Nasty SFT Shocker, sightly modded the body to fit the lower feedneck. as a Dye ASA, CP Reg, VP Scythe trigger, a modded snatch grip, HE Bolt, HE Bolt Sleeve, HE Bolt Guide, HE Firing Chamber and 14inch AA Freak barrel with 0.691 insert. The hole to remove the bolt assembly looks stripped (see picture) but I assure you it is the hole is deep enough that an allen key still removes it with ease.
Shocker o-ring kit
Humphrey solenoid and upper board, and stock board. Honestly not sure which of these work and which don't.
Strange SFT body. When I received this it was spray painted with some sparkly cheap spray paint so I took it off and polished it. It's not a perfect ob but it looks better than it did haha. The front body set screw on this is stripped and leaking. Also the body inserts are not set and one is damaged.
Cocker to Shocker barrel thread changer so you can use your auto cocker barrels on your shocker bodies.
Stock Nasty SFT trigger, Silver SFT trigger and a black NXT trigger.
Stock Nasty SFT reg
HE bolt guide (on the Nasty shocker), stock bolt guide
HE Bolt(on the Nasty shocker), 2 stock bolts
Stock firing chamber, HE firing chamber(on the nasty shocker)
Delrin bolt sleeve, stock bolt sleeve (on the nasty shocker)
Red SFT frame (pins stuck)
SFT frame I started to polish
Dye sticky grips
Edited by NBTIppy, 12 January 2013 - 06:12 AM.