Jump to content


Photo

Ultra Mega-loud cannon of death and doom and gloom


  • Please log in to reply
35 replies to this topic

#1 Panda's Revenge

Panda's Revenge

    Officially Sponsored by China Ball

  • Members
  • PipPipPipPipPipPip
  • 3,491 posts
  • Gender:Female
  • Location:San Diego


Posted 18 January 2013 - 07:59 PM

This shall now be an E-Bolt Build Thread.
Ram custom milled from CAD drawings should be around $200.
I also plan on cutting up a UL Frame to fit on the 98.

I would use the ram, some sort of board that meets the requirements, a noid, and some other parts.

Ram- $200
Board/Frame- $100-200
Solenoid- $50
HPR + LPR~ $100
ASA- $50 (either Eclipse OOPS or some ASA with line out front)
New Bolt/Power-Tube so it's LOUD AS FUCK- $50
Fittings- $20 (allowing a lot for fucked up fittings)
Macro- $5 (for 5 feet, just in case I fuck up)

Overall Price: $625.00

I'm probably going to regret this horribly.

It's gonna be called the "MarqsMann". Geddit? because it's gonna operate like a Marq but it's a Tippmann? 2clvr4u

Edited by Panda's Revenge, 13 April 2013 - 11:52 PM.


#2 reflexowner

reflexowner

    Unicorns eat tacos!

  • Members
  • PipPip
  • 210 posts
  • Gender:Male
  • Location:toronto ontario

Posted 18 January 2013 - 11:20 PM

Please post video when your done!!!!!!:)

Please post video when your done!!!!!!:)

 


#3 Panda's Revenge

Panda's Revenge

    Officially Sponsored by China Ball

  • Members
  • PipPipPipPipPipPip
  • 3,491 posts
  • Gender:Female
  • Location:San Diego


Posted 18 January 2013 - 11:24 PM

I highly doubt that this will be finished within the next 4 years.
But I'll try over the summer while learning C++ LOL

#4 tallsmallboy44

tallsmallboy44

    Space Cowboy

  • Members
  • PipPipPipPipPipPipPip
  • 5,155 posts
  • Gender:Male
  • Location:Ohio

Posted 18 January 2013 - 11:29 PM

Why not just get an Etek1, and an unported barrel?

fuck yolo
#carpediem

Feedback 2/0/0   Buy my shit here: http://www.techpb.co...-bob-long-vcom/


#5 Panda's Revenge

Panda's Revenge

    Officially Sponsored by China Ball

  • Members
  • PipPipPipPipPipPip
  • 3,491 posts
  • Gender:Female
  • Location:San Diego


Posted 18 January 2013 - 11:34 PM

But I want to make something.
Although that isn't a bad idea.

#6 gibbeepbroxzor

gibbeepbroxzor

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,312 posts
  • Gender:Male

Posted 19 January 2013 - 07:37 AM

Lol, an Etek with an unported Palmers brass barrel.... THAT would be loud.

I always found Ebolt tippys to be really cool, but there's a reason why there aren't that many. The cost to build is just SOOOOOO impractical. Building a custom milled/anno'd Cocker would be much cheaper/less time consuming.

#7 Cookybiscuit

Cookybiscuit

    Schadenfreude Fanatic

  • Members
  • PipPipPipPipPipPipPipPip
  • 15,588 posts
  • Gender:Female
  • Location:Mexico


Posted 19 January 2013 - 09:58 AM

Get yourself a C3 and stick a loudener on it. It will near match an Etek 3.

Awarded: " the biggest dumbass on this forum" 2012


#8 cocker addict

cocker addict

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,235 posts
  • Gender:Male
  • Location:Guelph, Ontario

Posted 19 January 2013 - 12:19 PM

Buy a brass eagle rainmaker, comes with an unported barrel already and they are loud as shit.

#9 Panda's Revenge

Panda's Revenge

    Officially Sponsored by China Ball

  • Members
  • PipPipPipPipPipPip
  • 3,491 posts
  • Gender:Female
  • Location:San Diego


Posted 19 January 2013 - 11:59 PM

Okay so here's what's gonna go down.

Ion breech/bolt/internals will be fabricated to create a ram similar to the ebolt ram.
It will look like this.
Posted Image

The problem will be mounting it to the 98 grooves, but I'll figure something out.
Removing the blowback valve should give me more efficiency because less air is being used, as well as not being necessary.

Basically besides the ram everything should almost be a drop in.
I need a 3-way(?) valve to hook up the regulator, the ram airline, and to the power tube to actually shoot it. I believe the Ion comes with it.
Filling the bolt pin hole shouldn't be a problem, and I actually plan to house the battery there like the old ebolts if I cannot place it else where.
If not, I will probably place it on the top if I cannot fit it in the grip frame. I could set up an Empire Relay to it with a drop forward like some people have, but I do not know yet.
Low Pressure Kit most likely will not be necessary.

IT WILL BE OLED. I WANT IT OLED. OLEDOLEDOLED.
I will also acquire the push pins to make this a tool-free disassembly besides the screws to remove the center feed.
Bolt could be TechT hush bolt or the stock bolt.
I'm very excited for this project.

#10 bassfisher

bassfisher

    Senior Member

  • Members
  • PipPipPipPipPip
  • 2,098 posts

Posted 23 January 2013 - 12:24 AM

what about a jcs red hot power tube for your tippmann, they make them way louder.
Carolina Riot Scenario Team

#11 madsnipes

madsnipes

    TechPB's Jailbot

  • Members
  • PipPipPipPipPipPipPip
  • 5,038 posts
  • Gender:Male
  • Location:In one of those "High-Tech" caves with Wi-fi

Posted 23 January 2013 - 12:27 AM

sounds like you need this
Posted Image

#32 "Dusty" of the Devil Dogs. Give us a like if you want - Devil Dogs Paintball

TechPBsig_zpsbc0cb057.jpg


#12 bigx

bigx

    Good? Bad? Im the guy with the gun.

  • Members
  • PipPipPipPipPipPip
  • 4,688 posts
  • Gender:Male
  • Location:Boston

Posted 23 January 2013 - 08:45 AM

I shot an Etek 3 for the longest time then I went out and put a plastic "vavaluzza" horn over the barrel and that motherfucker was loud!!!

"I'm the Anti-Christ. You got me in a vendetta kind of mood. You tell the angels in heaven you never seen evil so singularly personified as you did in the face of the man who killed you."

 

http://www.techpb.co...1 :Feedback 17/0/


#13 Panda's Revenge

Panda's Revenge

    Officially Sponsored by China Ball

  • Members
  • PipPipPipPipPipPip
  • 3,491 posts
  • Gender:Female
  • Location:San Diego


Posted 23 January 2013 - 09:12 AM

So it appears I will be chopping up an ion and putting it into the tippmann with a new power tube, and a loudener over the tip of the barrel.
The fastest shooting gun that cracks your eardrums. Awesome.

#14 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 21,669 posts
  • Gender:Female
  • Location:Your bedroom


Posted 23 January 2013 - 11:53 AM

"vavaluzza"

Vuvuzela.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 • Feedback - 23/0/0

Fear is the mind-killer


#15 bigx

bigx

    Good? Bad? Im the guy with the gun.

  • Members
  • PipPipPipPipPipPip
  • 4,688 posts
  • Gender:Male
  • Location:Boston

Posted 23 January 2013 - 02:42 PM


"vavaluzza"

Vuvuzela.


Ehh close enough but im serious that thing IS LOUD!!!

"I'm the Anti-Christ. You got me in a vendetta kind of mood. You tell the angels in heaven you never seen evil so singularly personified as you did in the face of the man who killed you."

 

http://www.techpb.co...1 :Feedback 17/0/


#16 Cookybiscuit

Cookybiscuit

    Schadenfreude Fanatic

  • Members
  • PipPipPipPipPipPipPipPip
  • 15,588 posts
  • Gender:Female
  • Location:Mexico


Posted 23 January 2013 - 04:16 PM

I shot an Etek 3 for the longest time then I went out and put a plastic "vavaluzza" horn over the barrel and that motherfucker was loud!!!

*Savagely searches for a .68 vuvuzela*

Awarded: " the biggest dumbass on this forum" 2012


#17 bigx

bigx

    Good? Bad? Im the guy with the gun.

  • Members
  • PipPipPipPipPipPip
  • 4,688 posts
  • Gender:Male
  • Location:Boston

Posted 23 January 2013 - 05:42 PM


I shot an Etek 3 for the longest time then I went out and put a plastic "vavaluzza" horn over the barrel and that motherfucker was loud!!!

*Savagely searches for a .68 vuvuzela*


You have to cut off the part of the horn you blow into then use electrical tape to attach it to the barrel. I used it in the woods and it scared people.

"I'm the Anti-Christ. You got me in a vendetta kind of mood. You tell the angels in heaven you never seen evil so singularly personified as you did in the face of the man who killed you."

 

http://www.techpb.co...1 :Feedback 17/0/


#18 Cookybiscuit

Cookybiscuit

    Schadenfreude Fanatic

  • Members
  • PipPipPipPipPipPipPipPip
  • 15,588 posts
  • Gender:Female
  • Location:Mexico


Posted 23 January 2013 - 06:23 PM



I shot an Etek 3 for the longest time then I went out and put a plastic "vavaluzza" horn over the barrel and that motherfucker was loud!!!

*Savagely searches for a .68 vuvuzela*


You have to cut off the part of the horn you blow into then use electrical tape to attach it to the barrel. I used it in the woods and it scared people.

I am going to steal the shit out of this idea. Does it actually make the vuvuzela sound or just makes it louder?

Awarded: " the biggest dumbass on this forum" 2012


#19 bigx

bigx

    Good? Bad? Im the guy with the gun.

  • Members
  • PipPipPipPipPipPip
  • 4,688 posts
  • Gender:Male
  • Location:Boston

Posted 23 January 2013 - 07:29 PM




I shot an Etek 3 for the longest time then I went out and put a plastic "vavaluzza" horn over the barrel and that motherfucker was loud!!!

*Savagely searches for a .68 vuvuzela*


You have to cut off the part of the horn you blow into then use electrical tape to attach it to the barrel. I used it in the woods and it scared people.

I am going to steal the shit out of this idea. Does it actually make the vuvuzela sound or just makes it louder?


Makes it louder, the vuvuzela sound is made by the vibration of your lips. Its kind of like a super cannonizer tip.

"I'm the Anti-Christ. You got me in a vendetta kind of mood. You tell the angels in heaven you never seen evil so singularly personified as you did in the face of the man who killed you."

 

http://www.techpb.co...1 :Feedback 17/0/


#20 Panda's Revenge

Panda's Revenge

    Officially Sponsored by China Ball

  • Members
  • PipPipPipPipPipPip
  • 3,491 posts
  • Gender:Female
  • Location:San Diego


Posted 23 January 2013 - 11:36 PM

Oh God I found schematics on how to mill out an e-bolt ram.
It's gonna be loudest, fastest, and ugliest motherfucker on the field.

#21 junits15

junits15

    And now I am become death, destroyer of worlds

  • Members
  • PipPipPipPipPip
  • 1,806 posts
  • Gender:Male
  • Location:The YOUnited STATES of 'MERICA

Posted 24 January 2013 - 06:48 PM

I like this project :)
Posted Image
Borg you will NEVER be forgotten.
TECHPB FEEDBACK IOG FEEDBACK
I bought an Ion.... in hindsight it was a bit of an Impulse buy

#22 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 21,669 posts
  • Gender:Female
  • Location:Your bedroom


Posted 24 January 2013 - 06:54 PM

Oh God I found schematics on how to mill out an e-bolt ram.

Wanna share with the rest of the class?

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 • Feedback - 23/0/0

Fear is the mind-killer


#23 Panda's Revenge

Panda's Revenge

    Officially Sponsored by China Ball

  • Members
  • PipPipPipPipPipPip
  • 3,491 posts
  • Gender:Female
  • Location:San Diego


Posted 24 January 2013 - 07:03 PM

Only because you asked Andrew.
In no way, shape, or form are these drawings mine.
I merely only saved them from PBN in the case that they would be deleted from ImageShack and I would have no schematics. Then I would be at square 0 again. I believe they are from "NaturalNewbie" originally.

http://www.pbnation....d.php?t=1866954
^ Thread I pulled it from.

http://www.pbnation....d.php?t=1875097
^Thread showing installation and directions to give the machinist.

So apparently if I bring these drawings to the machine shop, tell them that the rod needs to move smoothly in the ram and will create an airtight seal with an o-ring, I'm good to go.

Posted Image
Posted Image

Again, I claim no ownership of these photos. They are merely archived in my private library in cases of deletion from the original thread.

Reading further into the building thread, it seems as though the ram is somewhat difficult to make.
I would gladly do a middleman thing with a mod or someone to where they make the ram for me and I pay. But that's not gonna happen.

Hopefully I can get myself together and get some money for this project soon.

Edited by Panda's Revenge, 24 January 2013 - 07:41 PM.


#24 Panda's Revenge

Panda's Revenge

    Officially Sponsored by China Ball

  • Members
  • PipPipPipPipPipPip
  • 3,491 posts
  • Gender:Female
  • Location:San Diego


Posted 25 January 2013 - 10:05 PM

Posted Image

This is what I have to work with.
All internals not needed were taken out and set aside, and the previous owner even polished the internals.

#25 Panda's Revenge

Panda's Revenge

    Officially Sponsored by China Ball

  • Members
  • PipPipPipPipPipPip
  • 3,491 posts
  • Gender:Female
  • Location:San Diego


Posted 28 January 2013 - 12:52 AM

Can I bump this? LOL Wondering if anyone else was interested...

#26 reflexowner

reflexowner

    Unicorns eat tacos!

  • Members
  • PipPip
  • 210 posts
  • Gender:Male
  • Location:toronto ontario

Posted 28 January 2013 - 06:12 AM

Looking good!:)

 


#27 evan15549

evan15549

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,090 posts
  • Gender:Male

Posted 30 January 2013 - 10:20 PM


Get a ramrod, even on my friends broken in geo that thing was a cannon.

Edited by evan15549, 30 January 2013 - 10:24 PM.


#28 Panda's Revenge

Panda's Revenge

    Officially Sponsored by China Ball

  • Members
  • PipPipPipPipPipPip
  • 3,491 posts
  • Gender:Female
  • Location:San Diego


Posted 14 April 2013 - 12:05 AM

I updated the OP with my 3rd draft of pricing.

So far I've gotten nowhere on this build.
I plan to put a UL or similar OLED frame on the Tippmann.

The frame will be mounted 1-2 inches away from the rear of the Tippmann, making the frame and reg a little close to each other.

E-bolt, if not mentioned before, will be 2way with QEV.

After project completion I plan to mill any access metal away without challenging the structural integrity of the Tippmann. Unfortunately Tippmann markers cannot be annodized.

#29 bassfisher

bassfisher

    Senior Member

  • Members
  • PipPipPipPipPip
  • 2,098 posts

Posted 14 April 2013 - 12:53 AM

Spray paint for the win. Check out a hobby lobby or other craft stores for some metal flake spray paint, in the sun it will darn near blind you. Or Chrome.
Carolina Riot Scenario Team

#30 SuperShadow

SuperShadow

    Member

  • Members
  • PipPip
  • 178 posts
  • Gender:Male


Posted 21 May 2013 - 09:50 PM

Why can't tippys be annoed? If they could,I'd make it black with purple splash.

Edited by SuperShadow, 21 May 2013 - 09:51 PM.

MY SETUP: Geo 2.1, Dye Rotor,Ninja 68/4500
PMR FOR SALE
1/0/0

#31 Panda's Revenge

Panda's Revenge

    Officially Sponsored by China Ball

  • Members
  • PipPipPipPipPipPip
  • 3,491 posts
  • Gender:Female
  • Location:San Diego


Posted 21 May 2013 - 09:54 PM

They're die-cast, not aluminium.

#32 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 21,669 posts
  • Gender:Female
  • Location:Your bedroom


Posted 21 May 2013 - 09:59 PM

They're die-cast, not aluminium.

Die cast is a method, not a type of metal. Tippmanns are most likely an aluminum alloy.

RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 • Feedback - 23/0/0

Fear is the mind-killer


#33 SuperShadow

SuperShadow

    Member

  • Members
  • PipPip
  • 178 posts
  • Gender:Male


Posted 21 May 2013 - 10:11 PM

But why wouldn't an alloy be able to be anodized ? Does it have to do with the anodizing process?
MY SETUP: Geo 2.1, Dye Rotor,Ninja 68/4500
PMR FOR SALE
1/0/0

#34 Panda's Revenge

Panda's Revenge

    Officially Sponsored by China Ball

  • Members
  • PipPipPipPipPipPip
  • 3,491 posts
  • Gender:Female
  • Location:San Diego


Posted 21 May 2013 - 10:14 PM


They're die-cast, not aluminium.

Die cast is a method, not a type of metal. Tippmanns are most likely an aluminum alloy.


My bad.

#35 coleroeszler

coleroeszler

    Member

  • Members
  • PipPip
  • 101 posts

Posted 23 May 2013 - 12:55 AM

best fucking thread ever.

#36 paintballer481146

paintballer481146

    Member

  • Members
  • PipPip
  • 53 posts

Posted 26 July 2013 - 10:40 PM

For the barrel you should use a custom cut down barrel you can barely get up to 300 fps with just a 1 inch barrel with some markers 2 is a safer bet it will be inacurate and very eniffecent with the propellant but it will be extremely load i guess its up to you how small you want it 

 

another thing as others have mentioned is that you could put a canonizer/dishka on the end or another horn like a vuveluza or whatever 






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users