Posted 07 February 2013 - 10:55 PM
Posted 08 February 2013 - 07:50 AM
Posted 09 February 2013 - 12:09 AM
Posted 09 February 2013 - 08:01 AM
To be honest, for questions like that, it's probably best to call up a professional over at Ninja.
also another question, Is it safe to remove all shims from the standard ninja reg? and what pressure output will it give?
If anything went wrong, I doubt your tank's warranty and your medical insurance would accept a plea of "This random guy on the internet said it would be ok".
BST Feedback 21/0/0
Posted 09 February 2013 - 11:14 AM
Posted 09 February 2013 - 11:23 AM
Edited by cocker addict, 09 February 2013 - 11:26 AM.
Posted 09 February 2013 - 12:36 PM
Posted 09 February 2013 - 12:39 PM
Posted 09 February 2013 - 01:56 PM
Posted 09 February 2013 - 03:08 PM
Posted 09 February 2013 - 03:25 PM
Posted 09 February 2013 - 04:28 PM
Shooting it dry in my experience. You get some good practice in too. Another thing you can do is take your on off asa off your gun ( if you can), screw in your tank and then screw in the on off knob part way. You don't even need macro line and it can be very fast and loud or very slow and quiet, depending on how much u screw your asa in.
Also whats the best method of draining all the air from the tank?
Protip. Buy a shovel. Dig and Pile REPEAT until desired effect is achieved. Builds upper body and character. Bitches love upper body and character.
Posted 10 February 2013 - 10:28 AM
Played with a regulator that's just screwed in since 2008. I'd advice against using locktite, as if you need to take it of, it's a complete bitch to do and you might ruin your tank or regulator.
Car guy, detailer and photographer
Posted 11 February 2013 - 01:28 PM
Posted 11 February 2013 - 10:25 PM
Posted 12 February 2013 - 09:56 AM
Ok, still looking to see if removing all the shims from a ninja reg would be ok.
I believe that taking out all the shims wil set it to low pressure
Yes but I do not recommend it.Removing all the shims would get you to 450 to 550 psi.
You have a high pressure tank, your gun operates at 550PSI, or so you say. Why would you want to lower the pressure in your tank ? The way it is set up now, you will always be able to operate your marker until the tank gets so low that it cannot fire the solenoid anymore. Why take the chance on misfires by trying to run at threshhold pressure ? That really doesn't make sense to me.
Posted 13 February 2013 - 11:41 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users