Jump to content


Photo

2k11 G6R ASA Leak


  • Please log in to reply
7 replies to this topic

#1 marceldacs

marceldacs

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,072 posts
  • Gender:Male
  • Location:Chicago,IL

Posted 14 February 2013 - 10:43 PM

Before you ask.
-I am running at 400 psi (all shims out of my ninja reg)
-I am using dow 55 in the ASA
-I allowed the oring to soak in the dow 55 for 45 minutes and once i put it into the gun, i allowed it to rest for 30 minutes
-The leak is coming from the gap between the grip frame and the ASA.
-I have tried replacing the grip/ASA oring but this hasn't helped
-the orings don't look damaged/scratched

What should I do? Is there like a sealant that i could put around the gripfram/asa connecting point since this is where the leak is coming from?

#2 tallsmallboy44

tallsmallboy44

    Space Cowboy

  • Members
  • PipPipPipPipPipPipPip
  • 5,388 posts
  • Gender:Male
  • Location:Ohio

Posted 14 February 2013 - 10:44 PM

Tighten the screws holding the asa to the frame.

fuck yolo
#carpediem

Feedback 2/0/0   Buy my shit here: http://www.techpb.co...-bob-long-vcom/


#3 marceldacs

marceldacs

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,072 posts
  • Gender:Male
  • Location:Chicago,IL

Posted 14 February 2013 - 10:51 PM

allready did. Tightened all the way. Down. ill get pic up soon

#4 marceldacs

marceldacs

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,072 posts
  • Gender:Male
  • Location:Chicago,IL

Posted 14 February 2013 - 11:08 PM

Could i just take blue loctite and spread it near the region?

#5 WiscoBaller

WiscoBaller

    Master Member

  • TechPB Players Club
  • PipPipPipPipPipPip
  • 2,655 posts
  • Gender:Male

Posted 14 February 2013 - 11:12 PM

same as I told you in the shiny g6r thread, you need to send the asa in to bob as the asa tends to shear the oring on the asa pin, and cause this leak.

University of Wisconsin Whitewater Paintball Club
Sponsored by KEE, H2 Paintball, Empire
The Hooligans Paintball Team
Bob Long Victory Ripper Dye Rotor Dye Throttle 70/4500
Bob Long Ripper FST


#6 marceldacs

marceldacs

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,072 posts
  • Gender:Male
  • Location:Chicago,IL

Posted 14 February 2013 - 11:26 PM

even right after i replace the asa pin o-ring, it still leaks. I think that this rules out the asa pin oring as the cause of the leak. I am thinking that the leak is probably coming from the grip frame to ASA o-ring.

#7 510waffles

510waffles

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,767 posts
  • Gender:Male

Posted 15 February 2013 - 04:58 AM

as said in other thread

1)Get updated ASA pin
2)Dont use lube on the oring
3)???
4) Profit!!

#8 marceldacs

marceldacs

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,072 posts
  • Gender:Male
  • Location:Chicago,IL

Posted 15 February 2013 - 03:34 PM

i have the updated asa pin and tried testing the gun with/without dow 33 (the bob long tech said not to use dow 55 on the pin oring). I am thinking that the cause could be an almost empty tank since tank has about 1k psi left.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users