Jump to content


Photo

HELLP!


  • Please log in to reply
11 replies to this topic

#1 lukylovespaintballin

lukylovespaintballin

    Turtleloverofthemaxofthemostextreme

  • Members
  • PipPipPipPipPip
  • 1,381 posts
  • Gender:Male

Posted 21 February 2013 - 03:58 PM

I aired up my demon and it was leaking between the frame and the boy. It has all the 2013 updates. I changed all the bolt oring, checked the manifold and other oring around it. I cant fix it. anyone know how to fix it?

My link for my guns

MY FEEDBACK 5/0/0

Nothing some beatings tear gas and hard labour will fix


#2 Demon

Demon

    Master Tech

  • Members
  • PipPipPipPipPip
  • 2,087 posts
  • Gender:Male
  • Location:Omaha Nebraska


Posted 21 February 2013 - 03:59 PM

look inside the can, there is a really thin o-ring that has a groove it needs to fit into make sure it didn't pop out, also check the air transfer port o-rings. the part where the frame connects to the body.

Mad Cow Paintball referee and tech
UNL Husker Paintball
"Let's play a game of go fuck yourself, you first..."

My Feedback

 


#3 lukylovespaintballin

lukylovespaintballin

    Turtleloverofthemaxofthemostextreme

  • Members
  • PipPipPipPipPip
  • 1,381 posts
  • Gender:Male

Posted 21 February 2013 - 04:01 PM

look inside the can, there is a really thin o-ring that has a groove it needs to fit into make sure it didn't pop out, also check the air transfer port o-rings. the part where the frame connects to the body.


I checked both, looked fine, the air transfer port i changed and no cigar

My link for my guns

MY FEEDBACK 5/0/0

Nothing some beatings tear gas and hard labour will fix


#4 Demon

Demon

    Master Tech

  • Members
  • PipPipPipPipPip
  • 2,087 posts
  • Gender:Male
  • Location:Omaha Nebraska


Posted 21 February 2013 - 04:02 PM

put some dow 33 or 55 on it. mine looked ok too, still leaked.

Mad Cow Paintball referee and tech
UNL Husker Paintball
"Let's play a game of go fuck yourself, you first..."

My Feedback

 


#5 lukylovespaintballin

lukylovespaintballin

    Turtleloverofthemaxofthemostextreme

  • Members
  • PipPipPipPipPip
  • 1,381 posts
  • Gender:Male

Posted 21 February 2013 - 04:06 PM

on which one?

My link for my guns

MY FEEDBACK 5/0/0

Nothing some beatings tear gas and hard labour will fix


#6 mustangs

mustangs

    "Everyone has a plan, until they get hit in the face"

  • Members
  • PipPipPipPipPip
  • 1,184 posts
  • Gender:Male
  • Location:New Jersey

Posted 21 February 2013 - 04:57 PM

I've had several problems with my demon as well with the same leak. Even when I went on Sunday it had it once I got to the field even though I checked the day before. Couple of things, use Dow 55 only since those orings need to swell, make sure your shuttle valve on the bolt faces the right way (there a lip on it and that needs to face the front of the bolt), relube the transfer hole oring with Dow 55, make sure the orings inside the shuttle are generously lubed up, and last clean and lube the reg orings good enough too. That's how I fixed it Sunday



#7 lukylovespaintballin

lukylovespaintballin

    Turtleloverofthemaxofthemostextreme

  • Members
  • PipPipPipPipPip
  • 1,381 posts
  • Gender:Male

Posted 21 February 2013 - 04:59 PM

I've had several problems with my demon as well with the same leak. Even when I went on Sunday it had it once I got to the field even though I checked the day before. Couple of things, use Dow 55 only since those orings need to swell, make sure your shuttle valve on the bolt faces the right way (there a lip on it and that needs to face the front of the bolt), relube the transfer hole oring with Dow 55, make sure the orings inside the shuttle are generously lubed up, and last clean and lube the reg orings good enough too. That's how I fixed it Sunday


now to get dow 455

My link for my guns

MY FEEDBACK 5/0/0

Nothing some beatings tear gas and hard labour will fix


#8 mustangs

mustangs

    "Everyone has a plan, until they get hit in the face"

  • Members
  • PipPipPipPipPip
  • 1,184 posts
  • Gender:Male
  • Location:New Jersey

Posted 21 February 2013 - 09:28 PM


I've had several problems with my demon as well with the same leak. Even when I went on Sunday it had it once I got to the field even though I checked the day before. Couple of things, use Dow 55 only since those orings need to swell, make sure your shuttle valve on the bolt faces the right way (there a lip on it and that needs to face the front of the bolt), relube the transfer hole oring with Dow 55, make sure the orings inside the shuttle are generously lubed up, and last clean and lube the reg orings good enough too. That's how I fixed it Sunday


now to get dow 455


Dow 55 was recommended by Frank so I use dow 55. But some people recommend monkey poo and one suggested slick honey. I just use what was suggested by Frank himself



#9 lukylovespaintballin

lukylovespaintballin

    Turtleloverofthemaxofthemostextreme

  • Members
  • PipPipPipPipPip
  • 1,381 posts
  • Gender:Male

Posted 21 February 2013 - 10:15 PM



I've had several problems with my demon as well with the same leak. Even when I went on Sunday it had it once I got to the field even though I checked the day before. Couple of things, use Dow 55 only since those orings need to swell, make sure your shuttle valve on the bolt faces the right way (there a lip on it and that needs to face the front of the bolt), relube the transfer hole oring with Dow 55, make sure the orings inside the shuttle are generously lubed up, and last clean and lube the reg orings good enough too. That's how I fixed it Sunday


now to get dow 455


Dow 55 was recommended by Frank so I use dow 55. But some people recommend monkey poo and one suggested slick honey. I just use what was suggested by Frank himself


I'll try Dow 55 then send it to the shop

My link for my guns

MY FEEDBACK 5/0/0

Nothing some beatings tear gas and hard labour will fix


#10 lukylovespaintballin

lukylovespaintballin

    Turtleloverofthemaxofthemostextreme

  • Members
  • PipPipPipPipPip
  • 1,381 posts
  • Gender:Male

Posted 23 February 2013 - 11:43 AM

Fixed. Thanks for the help

My link for my guns

MY FEEDBACK 5/0/0

Nothing some beatings tear gas and hard labour will fix


#11 -ORaNGe-

-ORaNGe-

    No Bullshit Kinda Guy

  • Administrators
  • PipPipPipPipPipPipPipPip
  • 14,233 posts
  • Gender:Male
  • Location:CFB Trenton, Canada


Posted 23 February 2013 - 01:32 PM

If you ever have problems feel free to PM me and I'll take care of ya, the most common issues are either too little lube on the shuttle valve (The ring that slides back and forth) or the interior 017 bolt guide orings lacking lube.

Posted Image

#12 lukylovespaintballin

lukylovespaintballin

    Turtleloverofthemaxofthemostextreme

  • Members
  • PipPipPipPipPip
  • 1,381 posts
  • Gender:Male

Posted 23 February 2013 - 04:55 PM

^^ thank you, i will pm ypu if i need to

My link for my guns

MY FEEDBACK 5/0/0

Nothing some beatings tear gas and hard labour will fix





2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users