Edited by marceldacs, 26 March 2013 - 11:57 PM.
Posted 26 March 2013 - 11:56 PM
Posted 27 March 2013 - 01:26 AM
ok, first make sure everything on your G6 is cleaned, i mean take it down to the halves(The poppet) and make it's all all clean, don't forget the LPR and HPR make sure both of them have really nothing nasty in them. My G6 was getting +100/-100 the other day and it was due to my HPR being very dirty(they are known for this) regas it up and test the pressure, if it still creeps and your not leaking, make sure there is no shredded o-rings(may have to look at the manifold o-rings as well) if it still creeps, your pressure tester maybe faulty.
Posted 27 March 2013 - 01:32 AM
this is borderline pornography.......(bookmarks thread)
Captain of the Westside Paintball Team
Posted 27 March 2013 - 09:34 AM
Yes i did do this. If i remember correctly, my g6r was also shooting VERY high (about 350 fps). I think it was probably dirt.
when you adjust the reg pressures you need to vent the gas in the reg's to let them show an accurate pressure, make sure you dry fire with a cloth covering the breech opening to allow them to display the setting the HPR and LPR are currently at. also do this after turning off the ASA to get rid of any pressure in the tester so you can remove the LPR
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users