Jump to content


Photo

Axe won't pressurize. Need help fast!


  • Please log in to reply
12 replies to this topic

#1 Poopfairy35

Poopfairy35

    Providing useless insights here since 2013

  • Members
  • PipPipPip
  • 432 posts
  • Gender:Male
  • Location:Potville, USA


Posted 02 April 2013 - 06:42 PM

So just took my axe apart to clean it, (no I didn't mess with the reg) & when I gassed it up the gauge didn't budge & the gun won't fire. My tank is filled to 3000 psi. Need help fast!
I am a raccoon.

#2 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 22,001 posts
  • Gender:Female
  • Location:Your bedroom


Posted 02 April 2013 - 06:43 PM

Did you flip the on/off lever on the bottom of the ASA?

RebelSignaturejedicode-1.jpg
Hybrid SFT 09 Impulse HB REV-i Macroless Mech Ion
Rotor Grillz PE 70/45 Feedback - 23/0/0

Closer & Angel A1 F/S/T


#3 Poopfairy35

Poopfairy35

    Providing useless insights here since 2013

  • Members
  • PipPipPip
  • 432 posts
  • Gender:Male
  • Location:Potville, USA


Posted 02 April 2013 - 06:48 PM

Yeah. Air does come out when I flip the lever back.
I am a raccoon.

#4 kingJurzy

kingJurzy

    OFFICIAL TechPB's best member 2012

  • Members
  • PipPipPipPipPipPipPipPip
  • 9,071 posts
  • Gender:Male
  • Location:Bay Area, California


Posted 02 April 2013 - 06:55 PM

Talk it apart again. Did you take off the reg at all?

FEEDBACK: 23/0/0


#5 Poopfairy35

Poopfairy35

    Providing useless insights here since 2013

  • Members
  • PipPipPip
  • 432 posts
  • Gender:Male
  • Location:Potville, USA


Posted 02 April 2013 - 06:57 PM

Talk it apart again. Did you take off the reg at all?

Yeah, I did take it off the gun to wipe paint off of it because the gauge got shot a bunch.
I am a raccoon.

#6 kingJurzy

kingJurzy

    OFFICIAL TechPB's best member 2012

  • Members
  • PipPipPipPipPipPipPipPip
  • 9,071 posts
  • Gender:Male
  • Location:Bay Area, California


Posted 02 April 2013 - 07:02 PM

Take it off then put it back on, make sure you have the oring on there and make sure that the transfer hole gets lined up in there.

FEEDBACK: 23/0/0


#7 Poopfairy35

Poopfairy35

    Providing useless insights here since 2013

  • Members
  • PipPipPip
  • 432 posts
  • Gender:Male
  • Location:Potville, USA


Posted 02 April 2013 - 07:05 PM

Take it off then put it back on, make sure you have the oring on there and make sure that the transfer hole gets lined up in there.

Tried it, it didn't work. Thanks anyway.
I am a raccoon.

#8 kingJurzy

kingJurzy

    OFFICIAL TechPB's best member 2012

  • Members
  • PipPipPipPipPipPipPipPip
  • 9,071 posts
  • Gender:Male
  • Location:Bay Area, California


Posted 02 April 2013 - 07:08 PM

Can you just take the marker completely apart?


Maybe your gauge is broken because it does not give you a pressure.

FEEDBACK: 23/0/0


#9 Poopfairy35

Poopfairy35

    Providing useless insights here since 2013

  • Members
  • PipPipPip
  • 432 posts
  • Gender:Male
  • Location:Potville, USA


Posted 02 April 2013 - 07:15 PM

Can you just take the marker completely apart?


Maybe your gauge is broken because it does not give you a pressure.

Ok, I just took it apart & took the reg off, tried to gas it up, but air won't come out of the regulator with it off of the gun.
I am a raccoon.

#10 Tick

Tick

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,197 posts
  • Gender:Male

Posted 02 April 2013 - 07:23 PM

Change Battery, Reset to Stock Settings, Try adjusting the velocity for more air input

PayPal Verified | Over 300 + eBay transactions| 10/0/0


#11 Poopfairy35

Poopfairy35

    Providing useless insights here since 2013

  • Members
  • PipPipPip
  • 432 posts
  • Gender:Male
  • Location:Potville, USA


Posted 02 April 2013 - 07:38 PM

Change Battery, Reset to Stock Settings, Try adjusting the velocity for more air input

Thanks, it turns out my reg screw was just backed out to zero.
I am a raccoon.

#12 XGC_Cheevo

XGC_Cheevo

    Pod Scalping You

  • BST Moderator
  • PipPipPipPipPipPip
  • 2,868 posts
  • Gender:Male
  • Location:Mitchell, SD

Posted 02 April 2013 - 09:26 PM

So.... You've got it working again? If yes, glad to hear.

#13 kingJurzy

kingJurzy

    OFFICIAL TechPB's best member 2012

  • Members
  • PipPipPipPipPipPipPipPip
  • 9,071 posts
  • Gender:Male
  • Location:Bay Area, California


Posted 02 April 2013 - 09:51 PM

lol


Glad to hear it is working again.

FEEDBACK: 23/0/0





2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users