Axe won't pressurize. Need help fast!
Posted 02 April 2013 - 06:42 PM
Posted 02 April 2013 - 06:48 PM
Posted 02 April 2013 - 06:57 PM
Yeah, I did take it off the gun to wipe paint off of it because the gauge got shot a bunch.
Talk it apart again. Did you take off the reg at all?
Posted 02 April 2013 - 07:05 PM
Tried it, it didn't work. Thanks anyway.
Take it off then put it back on, make sure you have the oring on there and make sure that the transfer hole gets lined up in there.
Posted 02 April 2013 - 07:15 PM
Ok, I just took it apart & took the reg off, tried to gas it up, but air won't come out of the regulator with it off of the gun.
Can you just take the marker completely apart?
Maybe your gauge is broken because it does not give you a pressure.
Posted 02 April 2013 - 07:38 PM
Thanks, it turns out my reg screw was just backed out to zero.
Change Battery, Reset to Stock Settings, Try adjusting the velocity for more air input
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users