Cutting grips for OLED
Posted 22 April 2013 - 11:16 PM
Posted 22 April 2013 - 11:20 PM
Posted 22 April 2013 - 11:26 PM
My problem is how I deal with the plastic backing and cover the hole to keep paint out. I figure a dremel will solve the first problem, but would something like a thin piece of lexan put in place with epoxy work to cover with?
just get an razor blade, a pair of steady hands and start cutting. Make sure you measure twice and cut once... Just gently cut away till your exact measurements are the ones you want.
Posted 22 April 2013 - 11:29 PM
Posted 22 April 2013 - 11:31 PM
I was thinking take some material off the inside and have it overlap and epoxy that on. IDK about the fit though, I'd need to find something transparent and thin enough.
if you got Surgical hands you maybe able to cut a notch out for a VERY small piece of plexi like window.
Posted 22 April 2013 - 11:34 PM
Posted 23 April 2013 - 12:41 AM
Yeppers! Or I would just find some random plastic around the house of the right thickness and clearity
Cut the window out of the tadao grips?
Posted 23 April 2013 - 03:49 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users