Jump to content


Photo

GOG enmey with CO2?


  • Please log in to reply
8 replies to this topic

#1 RunGCaleb

RunGCaleb

    Member

  • Members
  • PipPip
  • 149 posts
  • Gender:Male
  • Location:Seth, WV


Posted 15 May 2013 - 09:13 PM

I heard that it could use CO2, but when I pulled it out if the plastic there was a little band on the macro line that said "anti-siphon CO2 only", but all the reviews never mentioned that. Is it really going to make a difference? I thought it had some sort of relief value for this very issue.

Basically, what type of CO2 tank will work with it?

#2 Manch Vegas Baller

Manch Vegas Baller

    Sophomore Member

  • Members
  • PipPipPip
  • 331 posts
  • Gender:Male
  • Location:the 603

Posted 15 May 2013 - 09:16 PM

I know the smart part vibes and sp-1s had the relief valve, but I don't know if gog kept the design. I would run it with only an anti siphon tank, but as always hpa is better and will be more reliable/consistent

Current set up
Gun:LE PDD Axe
Loader:V3 Rotor
Tank:Ninja 45/45
Axe FS/T: http://www.techpb.co...howtopic=222591


#3 kingJurzy

kingJurzy

    OFFICIAL TechPB's best member 2012

  • Members
  • PipPipPipPipPipPipPipPip
  • 9,054 posts
  • Gender:Male
  • Location:Bay Area, California


Posted 15 May 2013 - 09:17 PM

An anti siphon CO2 tank will work on it but a normal one will work as well.



The point of using anti siphon is to make sure the CO2 does not freeze the macro line

FEEDBACK: 23/0/0


#4 TotallyNotAKeeFanboy

TotallyNotAKeeFanboy

    Junior Member

  • Members
  • PipPipPipPip
  • 909 posts
  • Gender:Male
  • Location:Indiana

Posted 15 May 2013 - 09:18 PM

Anti-siphon will keep liquid co2 from entering the gun and causing issues. It would be best to use one for the sake of preserving your marker and preventing your velocity from going TOO crazy. It's really best to use hpa, but anti-siphon is the best compromise. If you were in a pinch a regular co2 tank would work, it just isn't ideal.

#5 RunGCaleb

RunGCaleb

    Member

  • Members
  • PipPip
  • 149 posts
  • Gender:Male
  • Location:Seth, WV


Posted 15 May 2013 - 09:38 PM

Alright, I just wasn't sure if it was something that would actually mess up my marker, or just wasn't recommended. I don't actually know of anywhere that fills up HPA near me, besides a field that's 50 miles away. We're working on getting a 50lb CO2 tank for fills where we play, perhaps I should look into getting the stuff to fill HPA as well? So for now I guess it's not really worth buy an anti siphon tank, or is it?

#6 TotallyNotAKeeFanboy

TotallyNotAKeeFanboy

    Junior Member

  • Members
  • PipPipPipPip
  • 909 posts
  • Gender:Male
  • Location:Indiana

Posted 15 May 2013 - 09:57 PM

You could get scuba tanks and an adapter for paintball tanks in the future. If you already have a co2 tank I wouldn't worry about an anti siphon.

#7 Orange Chicken

Orange Chicken

    TechPB's Most Annoying member

  • Members
  • PipPipPipPipPipPipPip
  • 5,508 posts
  • Gender:Male
  • Location:Tucson, Arizona

Posted 15 May 2013 - 11:41 PM

You could get an anti siphon tube, but the relief valve still exists in the eNMEy regulator, and should be fine against pressure spikes.

OrangeChicken_zpsbeae94b0.jpg?t=13691803

 


#8 BraiNfreeZe

BraiNfreeZe

    Junior Member

  • Members
  • PipPipPipPip
  • 960 posts
  • Gender:Male
  • Location:'Merica

Posted 16 May 2013 - 07:23 AM

It should work fine, but this needs to be moved to the equipment section.

"Always put a condom on your stiffi incase you shoot in the safety zone."


#9 RunGCaleb

RunGCaleb

    Member

  • Members
  • PipPip
  • 149 posts
  • Gender:Male
  • Location:Seth, WV


Posted 16 May 2013 - 10:28 AM

Alright, thanks a lot guys I appreciate it! And sorry for the wrong section post, I'm still new here and just figuring everything out. My bad!




2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users