Jump to content


Photo

Azodin Blitz air leak


  • Please log in to reply
8 replies to this topic

#1 fliod

fliod

    Newbie

  • Members
  • Pip
  • 4 posts


Posted 27 May 2013 - 12:06 PM

Ok, i was out on the field yesterday everything was going fine, and suddenly my macro line popped out of the L joint connected to the regulator, i disconnected my tank and ran off the field, now when i reconnect my tank it leaks in between the 2 two metal pieces of that L piece that connects the macroline to the regulator
Posted Image

#2 Zephyr-_z

Zephyr-_z

    Member

  • Members
  • PipPip
  • 167 posts
  • Gender:Male

Posted 27 May 2013 - 10:52 PM

you probably ripped your macroline. try taking it out and putting it in again. if that doesn't work. get a new macroline

Zephyr-_Z.png

 


#3 Dogg3

Dogg3

    Sophomore Member

  • Members
  • PipPipPip
  • 558 posts

Posted 27 May 2013 - 11:28 PM

You're sure you've completely seated the macroline?

Try flipping the line around and see if the leak remains. Its a long shot, but its happened to me before.

Oh and in case this isn't unprofessional enough yet.

Fuck, shit, boobs, purple monkey dishwasher.


#4 fliod

fliod

    Newbie

  • Members
  • Pip
  • 4 posts


Posted 28 May 2013 - 01:04 AM

I tried both of those, the line does pretty worn so im going out to pick up a new one soon, but still are there any other ideas until i try that? I'll update when i try the new line

#5 fliod

fliod

    Newbie

  • Members
  • Pip
  • 4 posts


Posted 28 May 2013 - 09:45 PM

I got the new line and cut it to the same length as the stock line, I installed it and connected my tank and it still leaks from the same spot which leads me to believe that it could be something with the metal fitting itself, any ideas?

#6 Dogg3

Dogg3

    Sophomore Member

  • Members
  • PipPipPip
  • 558 posts

Posted 28 May 2013 - 10:02 PM

How did you cut the line? Is your cut straight?

Oh and in case this isn't unprofessional enough yet.

Fuck, shit, boobs, purple monkey dishwasher.


#7 fliod

fliod

    Newbie

  • Members
  • Pip
  • 4 posts


Posted 29 May 2013 - 03:38 PM

How did you cut the line? Is your cut straight?


i used the end of the length of tubing for that side and it is a perfect cut, since its from the manufacturer

#8 iNicker

iNicker

    Amazing Member

  • Members
  • PipPipPipPipPip
  • 1,420 posts
  • Gender:Male

Posted 29 May 2013 - 10:50 PM

worst case scenario, a new fitting is like 5 bucks.

#9 Soundwave

Soundwave

    I win paintball.

  • TechPB Players Club
  • PipPipPip
  • 659 posts
  • Gender:Male
  • Location:Melbourne, Australia

Posted 31 May 2013 - 02:52 AM

I think you've cut your line too short.

Here's my thinking: It sounds like the macro you had was probably torn or damaged in some way. So assuming that the macro on your gun was faulty, it's not a very good idea to cut the new macro to be just like your old faulty macro.

Try with a new piece of line, cut it longer than your old piece and make sure you REALLY get it in the fitting when you put it in.

Let me know how you go :)

Posted Image


My Moderator Application: http://www.techpb.co...howtopic=196721





2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users