Jump to content


Photo

Can I make my t2 semi auto?


  • Please log in to reply
8 replies to this topic

#1 That_guy097

That_guy097

    Member

  • Members
  • PipPip
  • 79 posts


Posted 10 June 2013 - 06:19 PM

I want to know how I can make my t2 into an autococker style gun. I also want to maintain the pump capability. Switch between pump and semi.

What parts will I need? What modifications will I need to do?

I have access to a CNC machine aswell.

#2 tallsmallboy44

tallsmallboy44

    Space Cowboy

  • Members
  • PipPipPipPipPipPipPip
  • 5,312 posts
  • Gender:Male
  • Location:Ohio

Posted 10 June 2013 - 10:40 PM

Its been done multiple times, even ebladed. You should just have to fit a front block to it, then use standard pneumatics.

fuck yolo
#carpediem

Feedback 2/0/0   Buy my shit here: http://www.techpb.co...-bob-long-vcom/


#3 That_guy097

That_guy097

    Member

  • Members
  • PipPip
  • 79 posts


Posted 11 June 2013 - 02:27 PM

What parts do I need to make the pneus?

#4 moon

moon

    Sophomore Member

  • Members
  • PipPipPip
  • 599 posts
  • Gender:Male
  • Location:derby

Posted 11 June 2013 - 03:03 PM

Normal cocker penus
Lpr
Ram
3 way



I can see this needing more than just the penus like new frame and a vasa with a hole for the timeing rod

I may be wrong about the frame and vasa though let me do some looking and see if I'm right

From what I'm seeing you will need a different vasa and frame to make it simi shouldn't be too hard to do though all the parts should be bolt on

Edited by moon, 11 June 2013 - 03:24 PM.

Ironmen Timmy for sale
http://www.techpb.co...9

#5 tallsmallboy44

tallsmallboy44

    Space Cowboy

  • Members
  • PipPipPipPipPipPipPip
  • 5,312 posts
  • Gender:Male
  • Location:Ohio

Posted 11 June 2013 - 03:35 PM

If you need a new frame, you will need to make a tray of a sort to go between the frame and body.

fuck yolo
#carpediem

Feedback 2/0/0   Buy my shit here: http://www.techpb.co...-bob-long-vcom/


#6 moon

moon

    Sophomore Member

  • Members
  • PipPipPip
  • 599 posts
  • Gender:Male
  • Location:derby

Posted 11 June 2013 - 06:02 PM

There may be a way to mod the frame on it to accept a timeing rod

If I where you I'd build a Merlin I just see lots of modding and money. You may have a marker you can switch but it will take a good amout of time to do and not to mention timeing cockers is a bitch lol
Ironmen Timmy for sale
http://www.techpb.co...9

#7 That_guy097

That_guy097

    Member

  • Members
  • PipPip
  • 79 posts


Posted 11 June 2013 - 06:11 PM

My plan is to buy the pneus. A 3 way, ram, lpr, actuating rod.

Then use a CNC to make a custom front block. Then see if I can make a grip frame with the CNC. If not buy a separate frame.

Or

Get a mag fed lol

#8 moon

moon

    Sophomore Member

  • Members
  • PipPipPip
  • 599 posts
  • Gender:Male
  • Location:derby

Posted 11 June 2013 - 08:07 PM

your vasa will need to be chances so the actuating rod/ timing rod has a place to go

I say build it and take pictures of the whole process
Ironmen Timmy for sale
http://www.techpb.co...9

#9 mosebind

mosebind

    Newbie

  • Members
  • Pip
  • 18 posts

Posted 16 June 2013 - 07:03 PM

Being the one that put an eblade on a T2, I will tell you it is probably harder to make it a mech. While the stock frame could the modded for and actuating rod I doubt that the trigger could; so you would need a new frame and then a custom spacer due the round body. I am not sure if the VASA could be milled for an actuating rod with our milling through the wall completely; so you may need a custom piece there. The biggest problem is that a standard front block doesn't put the ram and pump into the correct position. Becaused I used an eblade I was able to turn the front block slightly to get the pump arm to line up. If you are going to make your own front block take some careful measurements on the location of the pump arm holes in relation to the center of the bottom tube, and where the 3-way would sit.
If you do this and need a 1" ball end mill to make a spacer between frame and body, let me know and I can sell you the one I have for cheap.




2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users