Jump to content


Photo

NEW Guerrilla G3 Adjustable Position Regulator

guerrilla air G2 G3 guerrilla gorila gorrilla air gorrilla tiberius tiberius arms regulator

  • Please log in to reply
32 replies to this topic

#1 Gio24Dude

Gio24Dude

    Newbie

  • Members
  • Pip
  • 39 posts
  • Gender:Male
  • Location:Torrance, CA


Posted 19 July 2013 - 11:29 AM

G3-Features.jpg

 

We are proud to announce the release of the new G3 adjustable position regulator. The G3 allows you to adjust the position of the threads by simply loosening the brass top flange and rotating the brass collar to the desired position without the need to mess with set screws that can easily get lost or strip out.
 
The G3 regulator is the first Guerrilla Air branded regulator 100% designed and manufactured under Tiberius Arms.
 
Features include:
 
-360 Degree Adjustability
-Adjustable Pressure Output
-Extremely Low Fade Rate
-Extremely Fast Recharge Rate
-Hardened Fill Nipple with Conical Strut
-Low Profile Burst Disks
-Durable Brass Top Flange
-Low Profile Body Construction

Edited by Gio24Dude, 29 August 2013 - 09:55 PM.


#2 Ultimatefinn

Ultimatefinn

    Eric Jr.

  • Members
  • PipPipPip
  • 393 posts
  • Gender:Male
  • Location:Boston, Massachusetts

Posted 19 July 2013 - 12:04 PM

Cost? It might be able to compete with the ninja pro if it is cheaper
This is exactly what marketing guns has come down too. a dick waving contest. You can say all the stuff you want but until you whip it out wave it around and prove it to the world everyone will doubt you. -bigx

#3 Schuppert3

Schuppert3

    Respect the BBN

  • TechPB Players Club
  • PipPipPipPipPipPipPipPip
  • 9,014 posts
  • Gender:Male
  • Location:Lexington Kentucky

Posted 19 July 2013 - 12:28 PM

Too short for me. I love the fact that the ninja pro is longer and adjustable.


yea I kept seeing banner ads for asianbeaver.com until I cleared my cache

Feedback +5/-0
Mod App


#4 kingJurzy

kingJurzy

    OFFICIAL TechPB's best member 2012

  • Members
  • PipPipPipPipPipPipPipPip
  • 9,071 posts
  • Gender:Male
  • Location:Bay Area, California


Posted 19 July 2013 - 12:37 PM

Too short for me. I love the fact that the ninja pro is longer and adjustable.

but it says in the OP that there is adjustable output


FEEDBACK: 23/0/0


#5 XGC_Cheevo

XGC_Cheevo

    Pod Scalping You

  • BST Moderator
  • PipPipPipPipPipPip
  • 2,867 posts
  • Gender:Male
  • Location:Mitchell, SD

Posted 19 July 2013 - 01:37 PM

All I read was "Brass".... :wub:



#6 Gio24Dude

Gio24Dude

    Newbie

  • Members
  • Pip
  • 39 posts
  • Gender:Male
  • Location:Torrance, CA


Posted 19 July 2013 - 02:16 PM

Cost? It might be able to compete with the ninja pro if it is cheaper

MSRP is $49.95



#7 Garribean

Garribean

    Junior Member

  • Members
  • PipPipPipPip
  • 890 posts
  • Gender:Male

Posted 19 July 2013 - 04:05 PM

 

Cost? It might be able to compete with the ninja pro if it is cheaper

MSRP is $49.95

 

Getting this instead of a Pro reg now.



#8 kingJurzy

kingJurzy

    OFFICIAL TechPB's best member 2012

  • Members
  • PipPipPipPipPipPipPipPip
  • 9,071 posts
  • Gender:Male
  • Location:Bay Area, California


Posted 19 July 2013 - 04:08 PM

What is the adjustable pressure range? If it is what I need then I WILL buy one.


FEEDBACK: 23/0/0


#9 TippmannPlayer97

TippmannPlayer97

    R.I.P Mitch Lucker 10, 20, 1984 11, 1, 2012

  • Members
  • PipPipPipPipPip
  • 1,942 posts
  • Gender:Male
  • Location:Lutz, FL

Posted 21 July 2013 - 04:44 PM

So we can move the gauge and use it in every gun on the market now? Awesome! This is gonna devastate ninja i think


I like loud, kicky poppets. I am the last of my people.


#10 TheDyeingEmpirePlanet

TheDyeingEmpirePlanet

    DP doesn't always leak!

  • Members
  • PipPipPip
  • 653 posts
  • Gender:Male
  • Location:Texas


Posted 21 July 2013 - 05:41 PM

Too short, and ninjas are just ninjas.. Good/ninja. Same thing

Buy one of these if you want a cheap but nice electro!!!
DP E1!!!
TBC_logo.jpg


#11 Pvlacrosse14

Pvlacrosse14

    Indians Football OG #67

  • Members
  • PipPipPipPipPipPip
  • 2,591 posts
  • Gender:Male

Posted 21 July 2013 - 08:19 PM

There's not enough adjustability. I read that it was 800-950 or something like that
My Setup- OLED G6R, Virtue Spire 260, Ninja Pro V2 68/45, Empire Events, 2013 NXE Elevation

#12 TippmannPlayer97

TippmannPlayer97

    R.I.P Mitch Lucker 10, 20, 1984 11, 1, 2012

  • Members
  • PipPipPipPipPip
  • 1,942 posts
  • Gender:Male
  • Location:Lutz, FL

Posted 21 July 2013 - 09:50 PM

^ that's not even adjustable in my book. that cant be right ^


I like loud, kicky poppets. I am the last of my people.


#13 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 21,996 posts
  • Gender:Female
  • Location:Your bedroom


Posted 21 July 2013 - 09:52 PM

You can adjust the position of the fill nipple and gauge, and adjusting the psi is still adjusting, even if you don't like the range.


Edited by andrewthewookie, 21 July 2013 - 09:53 PM.

RebelSignaturejedicode-1.jpg
Hybrid SFT 09 Impulse HB REV-i Macroless Mech Ion
Rotor Grillz PE 70/45 Feedback - 23/0/0

Closer & Angel A1 F/S/T


#14 Schuppert3

Schuppert3

    Respect the BBN

  • TechPB Players Club
  • PipPipPipPipPipPipPipPip
  • 9,014 posts
  • Gender:Male
  • Location:Lexington Kentucky

Posted 21 July 2013 - 09:56 PM

 

Too short for me. I love the fact that the ninja pro is longer and adjustable.

but it says in the OP that there is adjustable output

 

Didn't mean the output. I was saying I like the ninja regs because they have adjustable bonnet and are longer.


yea I kept seeing banner ads for asianbeaver.com until I cleared my cache

Feedback +5/-0
Mod App


#15 TippmannPlayer97

TippmannPlayer97

    R.I.P Mitch Lucker 10, 20, 1984 11, 1, 2012

  • Members
  • PipPipPipPipPip
  • 1,942 posts
  • Gender:Male
  • Location:Lutz, FL

Posted 21 July 2013 - 10:17 PM

You can adjust the position of the fill nipple and gauge, and adjusting the psi is still adjusting, even if you don't like the range.

Yes, but in what way would that make any difference? what gun runs on 900 PSI that cant run 800? short of a tippmann, and i kinda doubt guys with 98's would get a guerrilla tank, but hey, it happens... (I did...)


I like loud, kicky poppets. I am the last of my people.


#16 Ultimatefinn

Ultimatefinn

    Eric Jr.

  • Members
  • PipPipPip
  • 393 posts
  • Gender:Male
  • Location:Boston, Massachusetts

Posted 22 July 2013 - 06:13 AM

It said its adjustable from 800 psi to 920 psi with three shims. Can't be used on any macro less guns I guess.
This is exactly what marketing guns has come down too. a dick waving contest. You can say all the stuff you want but until you whip it out wave it around and prove it to the world everyone will doubt you. -bigx

#17 TJO

TJO

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,001 posts
  • Gender:Male

Posted 22 July 2013 - 06:35 PM

It said its adjustable from 800 psi to 920 psi with three shims. Can't be used on any macro less guns I guess.

not that i disagree that the range is barely useful why cant you use high pressure on macroless guns? do they not have regs? ran high pressure through my axe and vanquish just fine.



#18 kingJurzy

kingJurzy

    OFFICIAL TechPB's best member 2012

  • Members
  • PipPipPipPipPipPipPipPip
  • 9,071 posts
  • Gender:Male
  • Location:Bay Area, California


Posted 22 July 2013 - 08:13 PM

ever heard of BL markers?


FEEDBACK: 23/0/0


#19 Strick

Strick

    Member

  • Members
  • PipPip
  • 50 posts
  • Gender:Male
  • Location:Glenwood, AL


Posted 22 July 2013 - 08:13 PM

Yeah, never had a problem using 800-850 with my axe. 


 
The Conglomerate Paintball Group

#20 Ultimatefinn

Ultimatefinn

    Eric Jr.

  • Members
  • PipPipPip
  • 393 posts
  • Gender:Male
  • Location:Boston, Massachusetts

Posted 22 July 2013 - 09:17 PM

On some macro less guns it can bust the fittings on the inside of the frame.
This is exactly what marketing guns has come down too. a dick waving contest. You can say all the stuff you want but until you whip it out wave it around and prove it to the world everyone will doubt you. -bigx

#21 gibbeepbroxzor

gibbeepbroxzor

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,347 posts
  • Gender:Male

Posted 22 July 2013 - 11:25 PM

On the 2011 g6r the orings between the asa and frame could get dislodged from the correct position and leak. The cam drive style asa on the victories and newer g6rs dont ahve the same problem to my understanding, and therefor high pressure works perfectly fine.



#22 Nobben #44

Nobben #44

    Life's too short to drive boring cars

  • Members
  • PipPipPipPipPipPipPipPip
  • 11,465 posts
  • Gender:Male
  • Location:Land of Fresh Fish


Posted 23 July 2013 - 11:16 AM

I'll keep my Ninja, used a Ninja reg since 2008 and never had any issue with it. 



#23 TippmannPlayer97

TippmannPlayer97

    R.I.P Mitch Lucker 10, 20, 1984 11, 1, 2012

  • Members
  • PipPipPipPipPip
  • 1,942 posts
  • Gender:Male
  • Location:Lutz, FL

Posted 23 July 2013 - 06:33 PM

Question for the Guerrilla guys. Is that really true it's only adjustable between 800-950 or so? If that's the case there's really no point in putting the adjustability in. If this is meant for tippmann guns, you're looking at a very small niche of possible consumers. Or is everyone here mistaken and it goes from 500-950, for example.


I like loud, kicky poppets. I am the last of my people.


#24 TJO

TJO

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,001 posts
  • Gender:Male

Posted 23 July 2013 - 10:12 PM

ever heard of BL markers?

after a little research and other comments this is really the only company, I have seen having problems, and honestly I think that's a design flaw they should deal with. 



#25 BurningPlaydoh

BurningPlaydoh

    Blow-dough'ed

  • Members
  • PipPipPipPipPipPipPip
  • 5,928 posts
  • Gender:Male
  • Location:Twin Cities, MN

Posted 23 July 2013 - 11:43 PM

 

It said its adjustable from 800 psi to 920 psi with three shims. Can't be used on any macro less guns I guess.

not that i disagree that the range is barely useful why cant you use high pressure on macroless guns? do they not have regs? ran high pressure through my axe and vanquish just fine.

 

Both the Axe and Vanquish regulate the HPA right at the ASA before it goes through the internal air passages.  Bob Long, DLX and MacDev markers dont.



#26 TJO

TJO

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,001 posts
  • Gender:Male

Posted 25 July 2013 - 09:12 PM

 

 

It said its adjustable from 800 psi to 920 psi with three shims. Can't be used on any macro less guns I guess.

not that i disagree that the range is barely useful why cant you use high pressure on macroless guns? do they not have regs? ran high pressure through my axe and vanquish just fine.

 

Both the Axe and Vanquish regulate the HPA right at the ASA before it goes through the internal air passages.  Bob Long, DLX and MacDev markers dont.

 

well ive also run high pressure through a clone gt and a demon with no problems.



#27 Gio24Dude

Gio24Dude

    Newbie

  • Members
  • Pip
  • 39 posts
  • Gender:Male
  • Location:Torrance, CA


Posted 02 August 2013 - 06:16 PM

What is the adjustable pressure range? If it is what I need then I WILL buy one.

 

Within two weeks we are shipping the Output Pressure kits to adjust the pressure. We will have ELOP (G6R/Victory), LP, MP, and Extra HP. 

 

So we can move the gauge and use it in every gun on the market now? Awesome! This is gonna devastate ninja i think

 

Yes you can do that. Also most markers you can just move the asa forward and you are good to go.  :tup:

 

Let me know if you guys have any other questions. ;)  



#28 Punisher068

Punisher068

    Member

  • Members
  • PipPip
  • 216 posts
  • Gender:Male
  • Location:Santa Cruz Mountains

Posted 04 August 2013 - 09:34 PM

My 'Mag teammate will love this,800psi is a little low to use on his RT to max out performace,could be good for Nelson pump guns too to help with finding your "sweet spot"

If they offer this for a LP or ULP Id be interested myself



#29 Gio24Dude

Gio24Dude

    Newbie

  • Members
  • Pip
  • 39 posts
  • Gender:Male
  • Location:Torrance, CA


Posted 05 August 2013 - 12:09 PM

My 'Mag teammate will love this,800psi is a little low to use on his RT to max out performance,could be good for Nelson pump guns too to help with finding your "sweet spot"

If they offer this for a LP or ULP Id be interested myself

 

This is the main reason we came out with the included shims for players that wanted to fine tune the output pressure for markers that require more pressure.. A good example is the Scarab arms markers that requires an output pressure above 850 PSI for better consistency. 



#30 cockerpunk

cockerpunk

    All the Dudes

  • Moderator
  • PipPipPipPipPipPipPipPip
  • 9,116 posts
  • Gender:Male


Posted 05 August 2013 - 03:47 PM

mmmmmmmmmm, might be some upcomming punkworks testing in the future.


The ultimate truth in paintball is that the interaction between the gun and the player is far and away the largest factor in accuracy, consistency, and reliability.

And yes, Gordon is the sexiest manifestation of "to the front."


#31 TheAlmostPanda

TheAlmostPanda

    Member

  • Members
  • PipPip
  • 162 posts

Posted 05 August 2013 - 06:27 PM

mmmmmmmmmm, might be some upcomming punkworks testing in the future.

Is It bad that I'm more excited about the potential Punkwork testing than the actual product?


Cattle die, kinsmen die all men are mortal.
Words of praise, will never perish
nor a noble name.
- The Havamal

jacket for sale


#32 Punisher068

Punisher068

    Member

  • Members
  • PipPip
  • 216 posts
  • Gender:Male
  • Location:Santa Cruz Mountains

Posted 06 August 2013 - 02:22 PM

 

My 'Mag teammate will love this,800psi is a little low to use on his RT to max out performance,could be good for Nelson pump guns too to help with finding your "sweet spot"

If they offer this for a LP or ULP Id be interested myself

 

This is the main reason we came out with the included shims for players that wanted to fine tune the output pressure for markers that require more pressure.. A good example is the Scarab arms markers that requires an output pressure above 850 PSI for better consistency. 

 

Awesome you guys would consider this,getting hard to find a over 800 psi regs,is there a release date yet?Definatley interested,i know a few Hammer 7 owners that would be also



#33 Gio24Dude

Gio24Dude

    Newbie

  • Members
  • Pip
  • 39 posts
  • Gender:Male
  • Location:Torrance, CA


Posted 07 August 2013 - 01:48 PM

 

 

My 'Mag teammate will love this,800psi is a little low to use on his RT to max out performance,could be good for Nelson pump guns too to help with finding your "sweet spot"

If they offer this for a LP or ULP Id be interested myself

 

This is the main reason we came out with the included shims for players that wanted to fine tune the output pressure for markers that require more pressure.. A good example is the Scarab arms markers that requires an output pressure above 850 PSI for better consistency. 

 

Awesome you guys would consider this,getting hard to find a over 800 psi regs,is there a release date yet?Definatley interested,i know a few Hammer 7 owners that would be also

 

 

The G3 is released and is shipping out to stores now. 







2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users