Jump to content


Photo

Contacting Sanchez Machine?


  • Please log in to reply
5 replies to this topic

#1 Devin Bailey

Devin Bailey

    Member

  • Members
  • PipPip
  • 254 posts
  • Gender:Male
  • Location:Southern California

Posted 28 August 2013 - 01:27 AM

I really want to contact Sanchez Machine because I own a first gen SM-1 Pump gun and the front block is very easy to misalign with the pump rod holes during aggressive play. This creates the rods to scratch and the pump stroke is gritty and very hard to pump. 

I really want to talk to them or someone about getting a new front block that doesn't have the pump rod guide holes so that there are only one set of holes to go through. 

I attached a picture to help talking about the part I'm describing.

Someone please help!

Attached Files



#2 andrewthewookie

andrewthewookie

    Shaaaaaaaaaaaaaaaaarks :(

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 21,947 posts
  • Gender:Female
  • Location:Your bedroom


Posted 28 August 2013 - 01:28 AM

Sanchez Machine is no more.


RebelSignaturejedicode-1.jpg
Hybrid SFT 09 Impulse HB REV-i Macroless Mech Ion
Rotor Grillz PE 70/45 Feedback - 23/0/0

Closer & Angel A1 F/S/T


#3 gibbeepbroxzor

gibbeepbroxzor

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,347 posts
  • Gender:Male

Posted 28 August 2013 - 12:13 PM

I would suggest trying loctite, but you should already have the pump guide rod loctited or teflon taped down pretty tight. If you don"t, you should. Another option is to have a local machine shop do the work for you. Or if you have a friend with the equipment.



#4 Devin Bailey

Devin Bailey

    Member

  • Members
  • PipPip
  • 254 posts
  • Gender:Male
  • Location:Southern California

Posted 28 August 2013 - 03:06 PM

I would suggest trying loctite, but you should already have the pump guide rod loctited or teflon taped down pretty tight. If you don"t, you should. Another option is to have a local machine shop do the work for you. Or if you have a friend with the equipment.

 

I tried blue loctite and it did not work as well as I'd hope. I'd like to eliminate the fact that there are two holes that can be misaligned easily. From my understanding the only solution would be to get the one I have milled? or worked on? idk the proper term

Or I could buy a new one? 



#5 gibbeepbroxzor

gibbeepbroxzor

    Senior Member

  • Members
  • PipPipPipPipPip
  • 1,347 posts
  • Gender:Male

Posted 28 August 2013 - 04:21 PM

You can just get it milled down. To make it look nice youd have to get it reannodized. If you care.



#6 Devin Bailey

Devin Bailey

    Member

  • Members
  • PipPip
  • 254 posts
  • Gender:Male
  • Location:Southern California

Posted 28 August 2013 - 05:11 PM

You can just get it milled down. To make it look nice youd have to get it reannodized. If you care.

I'm just going to buy one of the new styled ones. I contacted them through mcb and it's 30 for a new front block.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users