Jump to content


Photo

Pump Build for Next Year


  • Please log in to reply
8 replies to this topic

#1 DasJaco

DasJaco

    TIGER STYLE

  • Members
  • PipPipPip
  • 590 posts
  • Gender:Male
  • Location:Minnesota

Posted 26 October 2013 - 08:34 PM

So my plan for next years season is to build a pump so here are the parts

DYE Cocker Frame Silver

Blue 2k2 STO Body

CCM Pump Handle

BL 360 Reg Gloss Blue

CP ASA Gloss Blue

CP 1 Piece 

Stock Internals

BL Twisting Feedneck

 

Anything im missing? Any things I should add?


Edited by DasJaco, 26 October 2013 - 10:45 PM.

Lakeville Ambush #3

 

DLX Luxe 2.0

Dye Rotor

Ninja 77/4500


#2 Old Dude PB

Old Dude PB

    Safety third.

  • Members
  • PipPipPipPipPip
  • 1,617 posts
  • Gender:Male
  • Location:Lexington, MA

Posted 26 October 2013 - 10:11 PM

Looks nice. I'm personally partial to ASAs with the macro coming out the front instead of the sides, but if that doesn' bug you, it's not an issue. What are you doing about a feedneck? Is the STO threaded? Would you keep the usual WGP stovepipe, or replace it with something clamping? The biggest bang-for-the-buck upgrade I did to my Prostock pump is a low pressure spring kit. I kept the stock valve and hammer...just switched out the springs. So much smoother now.



#3 DasJaco

DasJaco

    TIGER STYLE

  • Members
  • PipPipPip
  • 590 posts
  • Gender:Male
  • Location:Minnesota

Posted 26 October 2013 - 10:44 PM

Looks nice. I'm personally partial to ASAs with the macro coming out the front instead of the sides, but if that doesn' bug you, it's not an issue. What are you doing about a feedneck? Is the STO threaded? Would you keep the usual WGP stovepipe, or replace it with something clamping? The biggest bang-for-the-buck upgrade I did to my Prostock pump is a low pressure spring kit. I kept the stock valve and hammer...just switched out the springs. So much smoother now.

The STO is threaded, I might try to find a BL Twisting Feedneck I had one on my old STO and it worked pretty well. I might have to look into a spring kit.


Edited by DasJaco, 26 October 2013 - 10:45 PM.

Lakeville Ambush #3

 

DLX Luxe 2.0

Dye Rotor

Ninja 77/4500


#4 bassfisher

bassfisher

    Senior Member

  • Members
  • PipPipPipPipPip
  • 2,100 posts

Posted 27 October 2013 - 12:18 PM

I would personally go with a slider, or 86* frame and different springs, and the ccm ivg so you don't have to remove the cocking rod for velocity adjustments.
Carolina Riot Scenario Team

#5 Sydarm

Sydarm

    XTC + Ninja + Pinokio

  • TechPB Players Club
  • PipPipPipPipPip
  • 1,977 posts
  • Gender:Male
  • Location:Oviedo, FL

Posted 27 October 2013 - 01:53 PM

Depending on what hoppers you may use, you might consider a lever lock feedneck. I have the Trinity one and am very pleased.



#6 -Taz-

-Taz-

    Mahna Mahna!

  • Chat Moderator
  • PipPipPipPipPip
  • 1,136 posts
  • Gender:Male
  • Location:Portland, Oregon

Posted 27 October 2013 - 06:23 PM

Are you talking the dye single or the double?
Don't Be A Chump! Buy a Pump!
 

"Oh my god! Zombie Horses! We'd be fucked!"


#7 DasJaco

DasJaco

    TIGER STYLE

  • Members
  • PipPipPip
  • 590 posts
  • Gender:Male
  • Location:Minnesota

Posted 27 October 2013 - 07:41 PM

I would personally go with a slider, or 86* frame and different springs, and the ccm ivg so you don't have to remove the cocking rod for velocity adjustments.

I dont mind removing the rods and I prefer the dye frame.

 

Depending on what hoppers you may use, you might consider a lever lock feedneck. I have the Trinity one and am very pleased.

I use an APP

 

Are you talking the dye single or the double?

Double 


Lakeville Ambush #3

 

DLX Luxe 2.0

Dye Rotor

Ninja 77/4500


#8 1shot

1shot

    Newbie

  • Members
  • Pip
  • 45 posts

Posted 29 October 2013 - 10:55 PM

Don't forget your ball detent.

#9 bassfisher

bassfisher

    Senior Member

  • Members
  • PipPipPipPipPip
  • 2,100 posts

Posted 31 October 2013 - 06:31 PM

Good point. Definately need a detent.
Carolina Riot Scenario Team




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users