Jump to content


Photo

2k5d species leak!


  • Please log in to reply
4 replies to this topic

#1 Smokey02

Smokey02

    Newbie

  • Members
  • Pip
  • 5 posts

Posted 18 December 2013 - 07:55 PM

Hey folks,
I have a species Timmy that has a leak coming from the grip frame. I currently do not have air to test with. Could it be from using HP air as opposed to LP?
Really hoping it's not the noid.
So any thoughts as to what can be done to fix this would be great.
Thanks in advance

#2 andrewthewookie

andrewthewookie

    Pull start me and I'm yours ;)

  • Chat Coordinator
  • PipPipPipPipPipPipPipPip
  • 21,629 posts
  • Gender:Female
  • Location:Your bedroom


Posted 18 December 2013 - 08:07 PM

No, it won't be because of the tank reg. Whatever is coming in, gets regulated down by your gun's HPR and LPR. A leak in the grip frame makes me first think it's a leaky solenoid barb or hose. When will you have air next?


RebelSignaturejedicode-1.jpg
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 • Feedback - 23/0/0

Fear is the mind-killer


#3 Old Dude PB

Old Dude PB

    Safety third.

  • Members
  • PipPipPipPipPip
  • 1,469 posts
  • Gender:Male
  • Location:Lexington, MA

Posted 18 December 2013 - 11:39 PM

Could be the barbs or washers on the ram sleeve too. I'd reseat/replace the hoses before I'd worry about the barbs, though. Also, make sure you're not over-pressurizing the LPR...you don't want to be running much more than 80 psi.

Edited by Old Dude PB, 18 December 2013 - 11:41 PM.


#4 TechPB-Mike

TechPB-Mike

    TechPB to the FRONT!!!

  • Root Admin
  • PipPipPipPipPipPipPipPip
  • 11,444 posts
  • Gender:Male
  • Location:Tampa FL


Posted 25 December 2013 - 12:47 PM

it's going to be leaking either from a barb/hose going into the solenoid, or the ram sleeve orings that go on the outside of the tube



#5 SOUP

SOUP

    Uber Member

  • Members
  • PipPipPipPipPipPipPipPip
  • 7,649 posts
  • Gender:Male
  • Location:Indiana


Posted 25 December 2013 - 01:47 PM

9/10 times it's those shitty little brass barbs. They come loose after awhile or if you over tighten them they crack... Get some steel high flow ones, the brass ones never seem to last for me. 


"Silence is a plus, violence is a must"-Tupac

---Indiana Baller---






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users