So I am new to pump and have read that on snipers you need to sweet spot the reg. so it is at its best. Please explain I would like to do it this weekend. Thanks in advance.
How to sweet spot an Empire Sniper
Posted 23 January 2014 - 08:38 PM
Turn up your reg over the chrono until the FPS stops increasing by taking a couple shots every quarter turn. Eventually you'll reach a point where the FPS starts to decrease even though you're increasing the reg pressure. Once you reach that peak, don't touch your reg, and instead chrono to the field limit with the IVG.
Edited by andrewthewookie, 23 January 2014 - 08:39 PM.
Hybrid SFT 09 Impulse HB REV-i Macroless Mech Ion
Rotor Grillz PE 70/45 Feedback - 23/0/0
Posted 23 January 2014 - 08:58 PM
Thanks I think that is something I can do. And how far should my ivg be turned in when i mess with the reg
Edited by Pump1998, 23 January 2014 - 08:59 PM.
Posted 25 January 2014 - 09:48 AM
When I am sweetspotting any cocker pump (what the Empire sniper is) I usually turn my IVG in about 2.5-3 turns.
Gives me a good range of adjustment in both directions after I have sweetspotted the marker
"Pumping is about as much a disadvantage for me as shifting is for a Nascar driver" - good buddy of mine said this when we were talking about going against the local tourney team
Thunder Bay Pump Club
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users