Jump to content


Photo

Would this work?


  • Please log in to reply
8 replies to this topic

#1 meh

meh

    Screw you guys, I'm goin' home

  • Members
  • PipPip
  • 217 posts
  • Gender:Male
  • Location:Burbank Cali

Posted 14 February 2014 - 12:50 PM

So I have an Axe and I was thinking of replacing the screw that holds the feedneck lever in place with one that doesn't need any tools to adjust. Any suggestions? Thanks.

Meh

 

If you're under 18 and pay for your own stuff, put this in your signature.


#2 bowmasta

bowmasta

    Sophomore Member

  • Members
  • PipPipPip
  • 429 posts

Posted 14 February 2014 - 12:55 PM

As long as you can find a thumb screw of the same threads you should be golden.


What?! I'm all out of powdered toast?!

#3 Wolfe

Wolfe

    Junior Member

  • Members
  • PipPipPipPip
  • 803 posts
  • Gender:Male
  • Location:Central IL

Posted 14 February 2014 - 12:55 PM

Long as you find a knob screw to fit, I don't see how this would be a problem. Feedneck lever screws tend to be somewhat proprietary (from what I've seen), but could be possible.



#4 meh

meh

    Screw you guys, I'm goin' home

  • Members
  • PipPip
  • 217 posts
  • Gender:Male
  • Location:Burbank Cali

Posted 14 February 2014 - 03:23 PM

Like i know the empire ressurection has a thumb screw but would it fit on the axe?


Meh

 

If you're under 18 and pay for your own stuff, put this in your signature.


#5 PREDATOR 47

PREDATOR 47

    Senior Member

  • Members
  • PipPipPipPipPip
  • 2,114 posts
  • Gender:Male
  • Location:Ohio

Posted 14 February 2014 - 03:34 PM

I think they use the same threads, but I'm not certain. Like mentioned above, all you'd need is a thumb screw that has the correct threading and length.



#6 meh

meh

    Screw you guys, I'm goin' home

  • Members
  • PipPip
  • 217 posts
  • Gender:Male
  • Location:Burbank Cali

Posted 14 February 2014 - 04:53 PM

Cool i'll look around. Thanks :)


Meh

 

If you're under 18 and pay for your own stuff, put this in your signature.


#7 bowmasta

bowmasta

    Sophomore Member

  • Members
  • PipPipPip
  • 429 posts

Posted 14 February 2014 - 05:14 PM

Seems the threads are the standard 8/32. Look at your local hardware store.


What?! I'm all out of powdered toast?!

#8 meh

meh

    Screw you guys, I'm goin' home

  • Members
  • PipPip
  • 217 posts
  • Gender:Male
  • Location:Burbank Cali

Posted 15 February 2014 - 12:31 AM

Seems the threads are the standard 8/32. Look at your local hardware store.

Thanks alot for finding the thread! 


Meh

 

If you're under 18 and pay for your own stuff, put this in your signature.


#9 meh

meh

    Screw you guys, I'm goin' home

  • Members
  • PipPip
  • 217 posts
  • Gender:Male
  • Location:Burbank Cali

Posted 15 February 2014 - 12:34 AM

Oh btw what is this? Do i just put it on top of my normal screw?

http://www.ansgear.c...shpart72570.htm


Edited by meh, 15 February 2014 - 12:34 AM.

Meh

 

If you're under 18 and pay for your own stuff, put this in your signature.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users