ok so I have a azodin blitz evo and everything works great except I can no longer change firing modes. it is stuck on semi-auto which was preset. the bottom button on the handle is supposed to be held in til the led flashes to start cycling through different firing modes. it doesn't do anything. the button works because I can still toggle the safe mode and the eyes. just cant change the firing modes. does anyone know what this could possibly be? I did accidentally let my 9v battery touch the board and it sparked once, but I could still cycle. all help is appreciated. thankyou
Azodin Blitz Evo Zen Boardazodin board blitz evo mode
Posted 28 March 2014 - 06:19 PM
the red circuit jumper has not been removed. everything is still set like it just came out of the box
Posted 28 March 2014 - 06:22 PM
Try removing that red jumper and putting it back on. If nothing changes, you might have to contact Azodin, the battery issue may have affected the board.
Hybrid SFT 09 Impulse HB REV-i Macroless Mech Ion
Rotor Grillz PE 70/45 Feedback - 23/0/0
Posted 28 March 2014 - 06:36 PM
the problem is solved. removing the jumper then replacing did the trick.
thank you for you help.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users