Disassembly of the Invert Mini regulator gauge
Posted 03 June 2010 - 06:25 PM
But it can't be that easy, and unscrewing the broken gauge doesn't feel easy, I've tried. Any tips or has anybody done it? Please only post if you know what you're talking about or have experience removing the gauge from the regulator... thanks.
Posted 03 June 2010 - 08:54 PM
Posted 04 June 2010 - 03:53 PM
Don't forget to wrap a little teflon tape on the new gauge before installation. Also make sure you use the right sized wrench so you don't scratch up the new gauge.
This sounds about right... but God damn is this old gauge difficult to remove. I tried using a pair of channel locks and had no success. I guess I'm just going to have to go out and buy me a ratchet and socket set because the sockets I have are too small for the gauge.
Posted 04 June 2010 - 09:07 PM
if yours is like mine they put it on with red loctite your best bet is guna be a a 15/16th crescent wrench
Are you freaking kidding me? Red loctite is permanent!
Oh boy, time to get a new regulator... how the hell were you able to crack this thing with a wrench?
Edited by porkchop, 04 June 2010 - 09:07 PM.
Posted 08 September 2010 - 11:11 PM
PM me and let me know how u did it
i think im gonna just give it to the repair guy @ my field
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users