Jump to content


Super~Man

Member Since 18 Mar 2009
Offline Last Active Apr 02 2010 09:03 AM
-----

Topics I've Started

Dangerous Power G3 Chopping.

01 April 2010 - 03:52 PM

My G3 is a blender. I cleaned out and made sure the detents were springy, which they are. They eyes are cleaned, and i'm pretty sure they are working properly. The bolt I just lubed with hater sauce just incase it was sticking forward, and not letting a ball to be put into the breech. I've ruled out anything, and still it chops.

I'm using a Pinokio hopper, and am on semi. My dwell is stock (14)

Virtue OLED board Battery Harness

10 January 2010 - 09:15 PM

I just accidentally ripped the wires out of my harness. Where would i get a battery harness that would fit a Virtue OLED board for an EOS. Tried googling... could only find dangerous power fusion battery harness', and spyder harness on ANS. I am looking for an ION/EOS battery harness for the OLED board Thanks in advance.

DP G3 Help

24 November 2009 - 06:36 PM

My G3's reg adjustment screw is stuck in the back position, so i cannot shoot. I was trying to fix my buddies EOS with my G3's reg, but then i was just playing around with the adjustment screw and it got stuck in the back bosition.

Can someone help me cause i've tried anything and that screw won't budge. Also the silver part that screws off won't come off either.

There is no air pressure in the reg i don't think, as i took it off the macroline. I have no idea if I just put it in really tight or not.
Thanks for your help

Empire Pant Sizing?

08 November 2009 - 01:23 PM

I am about 6' tall, with a 30-31" waist and a 34" inseam... I'm a little lenient on the waist size, but no on the inseam, because I can always throw a belt or do something like that. Anyone have a pair of pants going from 40-80$ that will fit me good. I was looking at the Empires on ANS, but I looked at the sizing charts, and a small has only a 30" inseam I believe, and a medium which goes from 30-34 has a 31' Inseam. Thanks for all your help.

VL Triton 2 threads

28 October 2009 - 10:18 AM

My friend has a VL Trition 2: Posted Image

and i read somewhere that spyder parts pretty much fit this marker. He wants a new barrel, anyone know if a spyder threaded barrel would fit? If not, what kind of threads???